# Multiple fibaro devices in one flow

**URL:** <https://community.homey.app/t/multiple-fibaro-devices-in-one-flow/1767>\
**Category:** Devices\
**Tags:** z-wave\
**Created:** [September 16, 2018, 3:38pm UTC](https://community.homey.app/t/multiple-fibaro-devices-in-one-flow/1767 "2018-09-16T15:38:10Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lbink](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lbink/32/12871_2.png) [@Lbink](https://community.homey.app/u/Lbink)\
**Post date:** [September 16, 2018, 3:38pm UTC](https://community.homey.app/t/multiple-fibaro-devices-in-one-flow/1767/1 "2018-09-16T15:38:10Z")

</div>

Hi,

I’ve setup my first switches and successfully connected them to my Homey. Some Z-wave range issues, but I’ll try to reposition my homey and some switches. For now an unused switch is used to build a Mesh.

If I create a flow to switch multiple lights (garden, two Fibaro 2 zwave-plus switches) only one of the lamps actually switches. The other three remain at the same state. Entering a delay, incrementing by a second for each switch channel works as a workaround.

Also, if I group these 4 lamps into one group (using the group app), only one lamp reacts.

Does anyone else have this issue? Or even better, know how to fix it?

Thanks,

Leo

---

<div class="post-metadata">

**Author:** ![Rdw](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rdw/32/10679_2.png) [@Rdw](https://community.homey.app/u/Rdw)\
**Post date:** [September 17, 2018, 6:15am UTC](https://community.homey.app/t/multiple-fibaro-devices-in-one-flow/1767/2 "2018-09-17T06:15:29Z")

</div>

I have the same issue with two dimmer switches in my kitchen.  
Unfortunatly i use the same workaround. I’m not aware of an actual fix.

---

<div class="post-metadata">

**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\
**Post date:** [September 18, 2018, 9:43am UTC](https://community.homey.app/t/multiple-fibaro-devices-in-one-flow/1767/3 "2018-09-18T09:43:46Z")

</div>

@Lbink and @Rdw sorry I am not really helping here with a solution. But my milage is different.

I have a flow called “Panic”. It does what it says, when holding down a Fibaro push button, all lights in my house and around the house (including the fish tank light 🐠 ) turn ON. Most of the devices are Fibaro, a mixture of Double Switches 2, Single Switch 2, Dimmer, Dual Relay. Some also Aeotec dimmer and nano switch. All together about 25 or so devices at once.  
I did not use any delay, I did not group the units.  
The lights do not switch all at once, indeed. They turn on in a kind of random sequence, but in less than 2 seconds, all are ON.

I do have a nice solid z-wave mesh network, thought.

---

<div class="post-metadata">

**Author:** ![Lbink](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lbink/32/12871_2.png) [@Lbink](https://community.homey.app/u/Lbink)\
**Post date:** [September 18, 2018, 9:03pm UTC](https://community.homey.app/t/multiple-fibaro-devices-in-one-flow/1767/4 "2018-09-18T21:03:39Z")

</div>

Thanks for your response Danone.

I think I have my mesh in order. I’ll give it another go this weekend.

On a side note. Sending multiple commands to my car is also somewhat unpredictable (Tesla. Trigger: If I enter geoefence. Action : close sunroof, switch on A/C and open charge port).