# Motion Sensor Timing - Multi-Sensor FP300

**URL:** <https://community.homey.app/t/motion-sensor-timing-multi-sensor-fp300/157753>\
**Category:** Devices\
**Created:** [July 30, 2026, 4:16pm UTC](https://community.homey.app/t/motion-sensor-timing-multi-sensor-fp300/157753 "2026-07-30T16:16:27Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [July 30, 2026, 4:34pm UTC](https://community.homey.app/t/motion-sensor-timing-multi-sensor-fp300/157753/2 "2026-07-30T16:34:01Z")

</div>

> [@Bas\_Moerenhout](#):
>
> the motion trigger seems to reset only after like 1 minute / 60 seconds and change to no motion detected.

This is the case for a number of motion sensors, purely to safe battery life.

In many cases there’s no person walking by within a minute, and if they are, I usually let the light on for a bit longer than a minute \> issue solved

With a flow like this, it won’t turn off until there’s no motion for x seconds. Plus it won’t turn on when there’s enough daylight (but that’s optional):

> [@The Flow Exchange(r) - Exchange Your Flows with Others!](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/5):
>
> Here is a flow that lets you control a light or other device, based on the lux of a sensor, when a zone detects motion.  
> The light or device are only turned on/off when it’s not yet on/off.
> 
> ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/7/872eb2a13db1aefba1fd30d900e8032c1464240a.png)

---

_[View the full topic](https://community.homey.app/t/motion-sensor-timing-multi-sensor-fp300/157753)._