# mmWave devices compatible Homey pro **URL:** \ **Category:** Devices\ **Created:** [August 25, 2024, 5:20pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990 "2024-08-25T17:20:46Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Anders\_Dissing](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/anders_dissing/32/55924_2.png) [@Anders\_Dissing](https://community.homey.app/u/Anders_Dissing)\ **Post date:** [August 25, 2024, 5:20pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/1 "2024-08-25T17:20:46Z")
Hey all Do any of you have any experience with a presence (mmWave) device that is compatible with Homey Pro? My need is, I have a small room, that I would like to know if somebody is presence in the room. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [August 26, 2024, 8:29am UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/2 "2024-08-26T08:29:55Z")
The [SONOFF Zigbee Human Presence Sensor (SNZB-06P)](https://sonoff.tech/product/gateway-and-sensors/snzb-06p/) should be sufficient for a small room. The maximum range is approx. 4 meters. I have already used this myself and have had very good experiences with it. However, I have not yet used any other presence sensor as a comparison. You should know, that people are also detected through wooden doors. In my case, the roller blinds were also detected as movement when they were closed/opened. This sensor is supported by the test version of the community [SONOFF Zigbee](https://homey.app/a/tech.sonoff) app and the official [Sonoff](https://homey.app/se.styrahem.sonoff.zigbee) app. ---
**Author:** ![Nathan\_OBryan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nathan_obryan/32/107231_2.png) [@Nathan\_OBryan](https://community.homey.app/u/Nathan_OBryan)\ **Post date:** [August 27, 2024, 2:53pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/3 "2024-08-27T14:53:25Z")
I have the SONOFF presence sensor setup in my home office, and the Aqara presence sensor in my Kitchen/Dining Room. The SONOFF sensor is much easier to setup and get working. Works great, but not a lot of features beyond basic presence sense. The Aqara sensor is much fancier, but not natively supported and kind of a lot of work to get going. I use it in my kitchen and dining room because it has zones so it can cover both rooms separately. Also the SONOFF sensor is less than half the price. ---
**Author:** ![0burner0](https://avatars.discourse-cdn.com/v4/letter/0/90ced4/32.png) [@0burner0](https://community.homey.app/u/0burner0)\ **Post date:** [January 2, 2025, 8:52pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/4 "2025-01-02T20:52:59Z")
Any new devices that are now supported? ---
**Author:** ![Leclettico](https://avatars.discourse-cdn.com/v4/letter/l/e9bcb4/32.png) [@Leclettico](https://community.homey.app/u/Leclettico)\ **Post date:** [January 5, 2025, 5:35pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/5 "2025-01-05T17:35:09Z")
Meross MS600 works (via Thread on Homey Pro - early 2023). But only basic presence and lux. No movement. [Here’s a review](https://global.dday.it/2024/10/01/296/a-presence-sensor-can-be-more-useful-than-a-motion-sensor-meross-ms600-review-how-it-works-and-what-can-do) (not in Homey) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [January 5, 2025, 6:19pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/6 "2025-01-05T18:19:39Z")
> [@Leclettico](#): > > only basic presence > no movement But… why do you put it that way: _ **presence** _ is the main purpose of a mmWave sensor! Some detect motion too slow, so additional motion sensors might be needed in certain situations. ---
**Author:** ![Leclettico](https://avatars.discourse-cdn.com/v4/letter/l/e9bcb4/32.png) [@Leclettico](https://community.homey.app/u/Leclettico)\ **Post date:** [January 5, 2025, 7:50pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/7 "2025-01-05T19:50:03Z")
Because the MS600 has also a PIR sensor for movement. I pointed it out for more information in case you want to integrate it into Homey ---
**Author:** ![Russell\_Ebbing](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/russell_ebbing/32/79404_2.png) [@Russell\_Ebbing](https://community.homey.app/u/Russell_Ebbing)\ **Post date:** [May 22, 2025, 2:09pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/8 "2025-05-22T14:09:51Z")
Apollo has a few interesting mmWave devices and expandable to include several environmental sensors. They can be expanded to include several light and air quality sensors. The site posts the “Works with Homey” stamp and the app store has the app in beta. Anybody have experiences with Apollo? > **[Expanding Smart Home Automation Capabilities | Apollo Automation](https://apolloautomation.com)** > > Experience the future of home automation with Apollo Automation. Our solutions, compatible with Home Assistant, are designed to cater to your unique household needs. I am planning to order in a couple weeks. ---
**Author:** ![LeonK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/leonk/32/121679_2.png) [@LeonK](https://community.homey.app/u/LeonK)\ **Post date:** [May 24, 2025, 2:54pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/9 "2025-05-24T14:54:36Z")
Do let us know your experience. I’m looking for a few mmWave sensors and I would be great if these work ---
**Author:** ![Russell\_Ebbing](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/russell_ebbing/32/79404_2.png) [@Russell\_Ebbing](https://community.homey.app/u/Russell_Ebbing)\ **Post date:** [May 25, 2025, 3:32pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/10 "2025-05-25T15:32:04Z")
Ordered the Apollo “R PRO-1 PoE mmWave Multisensor (LD2450 and Optional LD2412)” with all the optional sensors. Will report my rexperiences and opinions. This will take a ninth. ---
**Author:** ![Rob\_Morris](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob_morris/32/131974_2.png) [@Rob\_Morris](https://community.homey.app/u/Rob_Morris)\ **Post date:** [May 26, 2025, 2:50am UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/11 "2025-05-26T02:50:16Z")
I use the Aqara FP1e, paired through the Aqara M3 hub via Matter - works perfectly and took about 8 seconds to have up and running. I was thinking of giving the FP2 a try - but your comment is giving me pause… ---
**Author:** ![Robin\_De\_Lange](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_de_lange/32/25173_2.png) [@Robin\_De\_Lange](https://community.homey.app/u/Robin_De_Lange)\ **Post date:** [May 26, 2025, 6:55pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/12 "2025-05-26T18:55:26Z")
where do you find the homey app from apollo? and do they work out of the box with homey or do you need to progam esphome or something? ---
**Author:** ![h2009](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/h2009/32/122420_2.png) [@h2009](https://community.homey.app/u/h2009)\ **Post date:** [June 3, 2025, 5:20pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/13 "2025-06-03T17:20:41Z")
They don’t work correctly. Waste of money at the moment. Homey pro doesn’t see them as motion sensors. Developers don’t respond. ---
**Author:** ![Robin\_De\_Lange](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_de_lange/32/25173_2.png) [@Robin\_De\_Lange](https://community.homey.app/u/Robin_De_Lange)\ **Post date:** [June 3, 2025, 6:34pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/14 "2025-06-03T18:34:02Z")
Thanks! ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [June 5, 2025, 8:44pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/15 "2025-06-05T20:44:29Z")
This was just posted > [@\[APP\]\[PRO\] Apollo Automation](https://community.homey.app/t/apollo-automation-homey-app-in-final-testing-and-now-selling-the-homey-pro-mini/137678): > > We are excited to announce that the Apollo Automation app is currently in the final testing phase! The app will seamlessly integrate our fully local smart sensors into the Homey ecosystem worldwide! You can try the test version of our app here: [Apollo Automation Homey Test App](https://homey.app/en-us/app/com.apolloautomation/Apollo-Automation/test/) For our devices visit: [apolloautomation.com](http://apolloautomation.com)These three sensors are compatible for testing (all use USB-C and Wi-FI): [Apollo AIR-1](https://apolloautomation.com/products/air-1): A compact and feature-rich air quality sensor measuring… And do check out the [ESPhome app](https://community.homey.app/t/87271), b/c Apollo devices are ESP based ---
**Author:** ![Apollo\_Automation](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/apollo_automation/32/135139_2.png) [@Apollo\_Automation](https://community.homey.app/u/Apollo_Automation)\ **Post date:** [June 5, 2025, 8:50pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/16 "2025-06-05T20:50:54Z")
Thanks again for sharing this! Please let us know if there are any questions! Best, Justin ---
**Author:** ![Russell\_Ebbing](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/russell_ebbing/32/79404_2.png) [@Russell\_Ebbing](https://community.homey.app/u/Russell_Ebbing)\ **Post date:** [June 13, 2025, 8:48pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/17 "2025-06-13T20:48:28Z")
The Apollo app is available as test version as of this writing. I’ve installed it but i have not been received the sensor yet. So it’s very new and I’d expect a few issues until they get to the official release. I’m feeling adventurous and feeling this will work well in the coming weeks. > **[Apollo Automation](https://homey.app/en-us/app/com.apolloautomation/Apollo-Automation/test/)** > > Adds support for Apollo Automation sensors and devices. ---
**Author:** ![Apollo\_Automation](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/apollo_automation/32/135139_2.png) [@Apollo\_Automation](https://community.homey.app/u/Apollo_Automation)\ **Post date:** [June 13, 2025, 9:07pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/18 "2025-06-13T21:07:49Z")
Thank you for your support, and please keep us updated on your experience! We are community-driven and welcome feedback to help us improve. Be sure to take our [Future Product Survey](https://apolloautomation.com/pages/product-interest) and let us know what types of sensors you would like us to develop. We are actively working with Abe and the Homey team to officially release the Apollo app, so stay tuned! We are happy to answer any questions! Best, Justin ---
**Author:** ![Russell\_Ebbing](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/russell_ebbing/32/79404_2.png) [@Russell\_Ebbing](https://community.homey.app/u/Russell_Ebbing)\ **Post date:** [July 2, 2025, 11:56pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/19 "2025-07-02T23:56:33Z")
I’ve connected the R PRO-1 without issues. At this time the Homey App Test version is not fully functional but what I’ve seen is looking good. The CO2 sensor works well! They will need to offer calibration offsets for the temperature and humidity. Patience for for the radar features is required as they release new versions. Using the iPhone “HLK Tool” I am able to track the RADAR through a wall and upright piano so I’m, excited. As a developer who has been away from my Electrical Engineering roots for a while I’ve become interested in ESPHome boards. The R PRO-1 should also be able to support ESP-Presence and so not only tell where a person is can also say who using the BLE devices they are carying. Yeah that could be useful. ---
**Author:** ![Jumeira](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jumeira/32/69412_2.png) [@Jumeira](https://community.homey.app/u/Jumeira)\ **Post date:** [July 3, 2025, 8:35pm UTC](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990/20 "2025-07-03T20:35:43Z")
I saw this device some time ago and I bookmarked their website for future purchase, the device supports matter. > **[Wireless Human Presence Sensor LWR01](https://lafaer.co/products/human-presence-sensor-lwr01)** > > The first batch of LWR01 sensors sold out fast! Pre-order now from the second batch—shipping starts early September.   | LWR01 Wireless Human Presence Sensor Watch Video Previous Next Why Choose Lafaer LWR01? Flexible Power Supply – AA batteries... ![1_---1000x1000--LWR01_12c7243b-1173-4080-ba82-a50deeefd8ed.jpg](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/5/d509d02710bbb38b73363dc8e643f3c36086f8c0.webp) [Next page](https://community.homey.app/t/mmwave-devices-compatible-homey-pro/114990.md?page=2)