# Merkwaardige issues sinds overstap van homey 2018 naar homey pro 2023 en ziggo naar KPN in relatie tot google integratie **URL:** \ **Category:** đŸ‡łđŸ‡± Nederlands (Dutch)\ **Tags:** homey-pro\ **Created:** [September 7, 2023, 1:54pm UTC](https://community.homey.app/t/merkwaardige-issues-sinds-overstap-van-homey-2018-naar-homey-pro-2023-en-ziggo-naar-kpn-in-relatie-tot-google-integratie/88971 "2023-09-07T13:54:15Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [September 8, 2023, 7:51pm UTC](https://community.homey.app/t/merkwaardige-issues-sinds-overstap-van-homey-2018-naar-homey-pro-2023-en-ziggo-naar-kpn-in-relatie-tot-google-integratie/88971/9 "2023-09-08T19:51:09Z")
> [@Abby](#): > > De deprecated service melding gaat alleen maar weg als is in de instellingen van homey app "use official only " Exact. Je hoeft niets te verwijderen, zeker niet uit de smartlife app. Heb je ooit Tuya cloud apparaten op Homey gehad? Verwijder deze dan, zet de instellingen van de app op ‘use official only’. Voeg dan de, bijv. flood light weer toe. Mocht de flood light niet worden herkend door de app zoals je al schreef, dan ligt dat niet per sĂ© aan iets wat je niet goed gedaan zou hebben → die lamp wordt klaarblijkelijk niet ondersteund door de app. Maar dat is helemaal geen ramp, middels tap-to-run scenes kun je de lamp gewoon bedienen middels een door jou toegevoegde Homey virtuele knop: > [@\[APP\]\[Pro\] Tuya Cloud - This app allows you to connect Homey to the Tuya cloud](https://community.homey.app/t/app-pro-tuya-cloud/21313/296): > > You can control almost all non-supported Tuya devices by using Tuya Cloud Execute a Scene card in flows. (So, not usable for sensors, because you can’t “control” them \> you can [use RAW Commands](https://community.homey.app/t/app-pro-tuya-cloud/21313/765) for those!). Example: Diffuser control via Tuya Cloud ‘Execute a Scene’ card At your phone: Add the diffuser to the Tuya app. Create 2 “tap-to-run” scenes inside the Tuya app. A scene for “Switch diffuser & led on” Dito for the “off” function. To give you an idea, an overview of my tap-t
 In principe is zo alles te bedienen wat in de smartlife app is toegevoegd. Apparaten uitlezen (maar ook bedienen), gaat perfect middels de “Raw commands”, > [@\[APP\]\[Pro\] Tuya Cloud - This app allows you to connect Homey to the Tuya cloud](https://community.homey.app/t/app-pro-tuya-cloud/21313/765): > > When adding a device is not possible, try using the so called RAW Commands functionality. Howto: -With the flow below, youÂŽll be able to “listen” to event messages of your devices; In this example a message of the ‘text’ type, which will return text, numeric and yes/no values. So, when you trigger the device you want to control from the Tuya Smart mobile app ([Google store](https://play.google.com/store/apps/details?id=com.tuya.smart&pli=1) / [Apple store](https://apps.apple.com/nl/app/tuya-smart/id1034649547)), or the SmartLife mobile app ([Google store](https://play.google.com/store/apps/details?id=com.tuya.smartlife) / [Apple store](https://apps.apple.com/nl/app/smart-life-smart-living/id1115101477)) or when you just activate a sensor, you’ll catc
 Dit staat overigens allemaal aangegeven in het Tuya Cloud app topic: > [@\[APP\]\[Pro\] Tuya Cloud - This app allows you to connect Homey to the Tuya cloud](https://community.homey.app/t/app-pro-tuya-cloud-this-app-allows-you-to-connect-homey-to-the-tuya-cloud/21313/1): > > ### Not supported devices or functions > > Only when device is supported by API, it’s possible to add the device to this app. because I don’t own all device types, it’s hard to implement a device type which I don’t own. Contributions to code are welkom to add unsupported devices. Other possibility is to use raw commands > > ### Raw commands > > You can receive all messages send for devices with trigger cards. Also there are now action cards to send commands to you device. On this way you can interact with not directly supported devices are commands. Combine it with the virtual devices app and you can control most of your devices. It’s a function for advanced users, there is no validation when sending a command to your device. > > To get the device id’s, commands and possible values you can create a flow with the text event received trigger card. This card is returning device id, command and value for each action. Log the returned values to log app to know the commands of your devices, deviceid’s and possible values. > > See also Howto of @Peter_Kawa: [[App][Pro] Tuya Cloud - #765 by Peter\_Kawa](https://community.homey.app/t/app-pro-tuya-cloud/21313/765) > > ### Existing legacy devices can be used as long as they are paired, but can’t be added anymore > > - Legacy Light ( On/Off, some devices brightness and color) > - Legacy Switch( On/Off) > - Legacy Cover > > The official API( non legacy devices) is using push messages, so changes to devices should be direct visible, so no more 10 minutes waiting for updates. > > ### Scenes > > This app support the use of scenes. In the mobile Tuya/Smart life app you can make ‘Tap to run’ actions( In the past they where called scenes). Those actions can be called in a flow from this app. > **The scenes for the official API are not automatically updated, for now new scenes will only appear after a restart of this app.** > > See also howto of @Peter_Kawa: [[App][Pro] Tuya Cloud - #296 by Peter\_Kawa](https://community.homey.app/t/app-pro-tuya-cloud/21313/296) --- _[View the full topic](https://community.homey.app/t/merkwaardige-issues-sinds-overstap-van-homey-2018-naar-homey-pro-2023-en-ziggo-naar-kpn-in-relatie-tot-google-integratie/88971)._