# Mark Greenwave powernodes as end point **URL:** \ **Category:** Devices\ **Created:** [December 27, 2021, 11:13am UTC](https://community.homey.app/t/mark-greenwave-powernodes-as-end-point/57274 "2021-12-27T11:13:03Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Rudi\_Hendrix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rudi_hendrix/32/31931_2.png) [@Rudi\_Hendrix](https://community.homey.app/u/Rudi_Hendrix)\ **Post date:** [December 27, 2021, 2:23pm UTC](https://community.homey.app/t/mark-greenwave-powernodes-as-end-point/57274/4 "2021-12-27T14:23:51Z")
I don’t really see them doing things wrong. But for example, I have this issue: [Bewegingssensor - #7 by Martin\_De\_Vries](https://community.homey.app/t/bewegingssensor/17509/7) (A Coolcam Z-Wave PIR that seems to be “stuck” detecting movement which is not there) And I have this issue: [Fibaro smoke sensor battery level - Questions & Help - Homey Community Forum](https://community.homey.app/t/fibaro-smoke-sensor-battery-level/54199/10) (Battery level of some Fibaro smoke detectors not being updated after replacing the battery) That’s why I am investigating if I can control my Z-Wave network a little bit more. For example: my Homey is in the living room and a smart plug on the first floor is connected via a Greenwave power node that is in the garage. My multisensor in the bathroom (first floor) is connected through a Greenwave power node that is on the second floor. A Coolcam power plug in the living room (so, in line of sight of the Homey) is connected through **two** Greenwave power nodes that are on the other side of a concrete wall in the garage! 😑 So, in the meantime I had the reply from Caseda and basically, the only thing I can do if I want to rule this out is remove all Greenwave power nodes? I cannot stress enough that I really hope to figure this out, because this kind of fiddling with my home automation is why I wanted to move away from Domoticz! --- _[View the full topic](https://community.homey.app/t/mark-greenwave-powernodes-as-end-point/57274)._