# Manually editing Z-Wave routes

**URL:** <https://community.homey.app/t/manually-editing-z-wave-routes/115304>\
**Category:** Questions & Help\
**Tags:** z-wave\
**Created:** [August 31, 2024, 11:09pm UTC](https://community.homey.app/t/manually-editing-z-wave-routes/115304 "2024-08-31T23:09:53Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [September 3, 2024, 8:07am UTC](https://community.homey.app/t/manually-editing-z-wave-routes/115304/13 "2024-09-03T08:07:17Z")

</div>

> [@Giovanni\_Dienstmann](#):
>
> reconfigure the zwave network

I don’t know if “reconfiguration” is the right term for this, but after a PTP the Z-Wave network, also called mesh, reorganize itself new as @JPe4619 already mentioned.

If your Homey looks like a big black ice hockey puck, then it’s the Homey Pro (early 2023). If you are interested, all Homey models are listed in this [table](https://support.homey.app/hc/en-us/articles/360015447093-Comparing-the-existing-Homey-Pro-models).

> [@Giovanni\_Dienstmann](#):
>
> I never manually selected any security setting.

As already mentioned, this shouldn’t really be necessary with an HP23. However, if you still have problems with delays, you could try to see if the problem is solved or reduced if the devices are included “unsecure”. Please note that only devices with the security standard **S2 Authenticated** can be included via the code 0000 “unsecure”.  
But the problem is that the devices must first be deleted and then added again. This means that the flows have to be repaired.

> [@Giovanni\_Dienstmann](#):
>
> “wake up” battery-based devices

The procedure for waking up differs from device to device. This information can be found in the device manuals. → [Aeotec Z-Wave. : Aeotec Help Desk](https://aeotec.freshdesk.com/support/solutions/6000084017)

> [@Giovanni\_Dienstmann](#):
>
> reset the TX Error

PTP is the only way.

---

_[View the full topic](https://community.homey.app/t/manually-editing-z-wave-routes/115304)._