# Louvolite R2110-DC compatibility with Homey / Sunway app or other app options?

**URL:** <https://community.homey.app/t/louvolite-r2110-dc-compatibility-with-homey-sunway-app-or-other-app-options/160071>\
**Category:** Questions & Help\
**Created:** [September 27, 2026, 1:52pm UTC](https://community.homey.app/t/louvolite-r2110-dc-compatibility-with-homey-sunway-app-or-other-app-options/160071 "2026-09-27T13:52:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![hyeung](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyeung/32/41223_2.png) [@hyeung](https://community.homey.app/u/hyeung)\
**Post date:** [September 27, 2026, 1:52pm UTC](https://community.homey.app/t/louvolite-r2110-dc-compatibility-with-homey-sunway-app-or-other-app-options/160071/1 "2026-09-27T13:52:21Z")

</div>

Hi all,

I’m considering buying some new Louvolite One Touch motorised roller blinds and wanted to confirm compatibility with Homey before ordering.

The supplier states that its current Louvolite motors are the **1100 Series R2110-DC (2025 onwards)**. I’m using a **Homey Pro Early 2019**.

I’ve seen earlier posts confirming that some Louvolite One Touch blinds could be controlled through the **Sunway Window Coverings** app, but I’m not sure whether that also applies to the newer R2110-DC motors.

Has anyone successfully added an **R2110-DC / 1100 Series Louvolite motor** to Homey using the Sunway app?

In particular, I’d be interested to know:

- Which Sunway/Brel device type did you select when pairing?
- Does Homey pair/register directly with the blind motor, or does setup involve learning/copying commands from the Louvolite remote?
- Do **Open / Stop / Close** work reliably?
- Is percentage/position control available?
- Does Homey receive the **actual blind position** back from the motor?
- Is the **motor battery level** exposed in Homey?
- Can the normal Louvolite remote continue to operate the blind alongside Homey?

I’m particularly interested in the last two points because the newer Louvolite **R2190 16-channel remote has two-way feedback for blind position and motor battery level** , so it would be useful to know whether Homey can access any of that information too.

Just to clarify, this is the current **R2110-DC 1100 Series** , which Louvolite specifies as bidirectional 433MHz RF/Bluetooth rather than the DCM Matter-over-Thread motor.

Has anyone successfully paired this specific R2110-DC motor directly with a Homey Pro using the Sunway Window Coverings app?

Thanks — I’m hoping to confirm this before committing to several blinds.