# Looking for a heavy duty power plug **URL:** \ **Category:** Questions & Help\ **Created:** [September 28, 2023, 4:47am UTC](https://community.homey.app/t/looking-for-a-heavy-duty-power-plug/90405 "2023-09-28T04:47:21Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [September 28, 2023, 8:55am UTC](https://community.homey.app/t/looking-for-a-heavy-duty-power-plug/90405/6 "2023-09-28T08:55:31Z")
Ok, than they lost their connections. Have you checked if a new firmware is available? A FW update can be done with an Aeotec Z-Stick Gen5(+) and the Aeotec Homey App without deleting the Qubino Smart Plug from Homey ([instruction](https://aeotec.freshdesk.com/support/solutions/articles/6000263528-z-stick-gen-5-as-secondary-controller-in-homey)). Btw Aeotec. From Aeotec there was once the [Smart Switch 6](https://aeotec.freshdesk.com/support/solutions/articles/6000167099-smart-switch-6-technical-specifications-) also with 16 A available, but this plug is end of life. However, it may still be available. Just as info regarding my first question: I have the Qubino 3-Phase Smart Meter in use and I have to send every 5 minutes a Z-Wave basic command, otherwise the data would no longer be updated. When this happens the device is still connected but the data are “frozen”. As I already suggested, I would contact Qubino. They have also a own forum topic ([link](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354)). --- _[View the full topic](https://community.homey.app/t/looking-for-a-heavy-duty-power-plug/90405)._