# Konnected Alarm Panel Pro Integration to Homey Pro using MQTT **URL:** \ **Category:** Devices\ **Tags:** homey-pro\ **Created:** [May 8, 2025, 9:06pm UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225 "2025-05-08T21:06:17Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Ron\_Smith](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ron_smith/32/120735_2.png) [@Ron\_Smith](https://community.homey.app/u/Ron_Smith)\ **Post date:** [May 8, 2025, 9:06pm UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225/1 "2025-05-08T21:06:17Z")
Has anyone integrated the Konnected Alarm Panel Pro (with ESPHome firmware) to Homey Pro using MQTT? I’m looking for any pointers, warnings and sample setup if possible for the MQTT interface. After the MQTT integration, I plan to use the Heimdall app for the flows and user interface. Thanks in advance for any information. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [May 9, 2025, 12:04am UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225/2 "2025-05-09T00:04:45Z")
When it’s an ESPhome based device, why MQTT? You could give the [ESPhome app](https://community.homey.app/t/87271) a go first? ---
**Author:** ![Ron\_Smith](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ron_smith/32/120735_2.png) [@Ron\_Smith](https://community.homey.app/u/Ron_Smith)\ **Post date:** [May 9, 2025, 3:17pm UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225/3 "2025-05-09T15:17:03Z")
Thanks Peter! I’m new to Homey and this was just the advice I was looking for. ---
**Author:** ![ayali](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ayali/32/122595_2.png) [@ayali](https://community.homey.app/u/ayali)\ **Post date:** [December 19, 2025, 5:17pm UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225/4 "2025-12-19T17:17:10Z")
Why not using MQTT? Seems like the robust option imho It is supported on both ends, and would not break with new releases. Esphome support in Homey seems quite fragile. ---
**Author:** ![Ron\_Smith](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ron_smith/32/120735_2.png) [@Ron\_Smith](https://community.homey.app/u/Ron_Smith)\ **Post date:** [December 22, 2025, 5:22pm UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225/5 "2025-12-22T17:22:58Z")
I found that using ESPhome was easier than the MQTT coding. ESPhome on the Konnected GDO has been very stable over the past 7 months. No issues at all. I would like to move to the Matter FW since there have been updates to the Matter spec for garage door openers. I haven’t looked into it lately. I’m hoping that Konnected can make a certified Matter release (I think this is the correct wording) that would be recognized on the Homey Pro side. Again, I haven’t looked into this for months. Someone else may know the status of connecting the Konnected GDO to Homey via Matter. ---
**Author:** ![MarcM](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcm/32/17200_2.png) [@MarcM](https://community.homey.app/u/MarcM)\ **Post date:** [February 23, 2026, 7:50pm UTC](https://community.homey.app/t/konnected-alarm-panel-pro-integration-to-homey-pro-using-mqtt/136225/6 "2026-02-23T19:50:30Z")
Check the new ESPHome Controller App, just spent a week testing in, it works really great: > [@\[APP\]\[Pro\] Homey Pro Esphome Controller App](https://community.homey.app/t/app-pro-homey-pro-esphome-controller-app/150421/99): > > Dear Homey and Konnected fans! I am glad to let you know that the new ESPHome Controller app from Uğur BENEK @ugrbnk now fully supports the Konnected Alarm Panel 12 zones: Full support for the 12 Zones, 3 Outputs and even the Restart button Support for Konnected new Standalone Alarm System mode and probably also Alarm System Interface mode, will confirm when my interface modules arrive Encryption and Alarm codes supported All Flow cards implemented You can find the new app at [ESPHome Control…](https://homey.app/en-tr/app/com.ugrbnk.esphome/ESPHome-Controller/)