# Issues with Power Reporting **URL:** \ **Category:** Questions & Help\ **Created:** [September 6, 2018, 7:17am UTC](https://community.homey.app/t/issues-with-power-reporting/1207 "2018-09-06T07:17:33Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Tony\_Burn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tony_burn/32/2030_2.png) [@Tony\_Burn](https://community.homey.app/u/Tony_Burn)\ **Post date:** [September 6, 2018, 7:17am UTC](https://community.homey.app/t/issues-with-power-reporting/1207/1 "2018-09-06T07:17:33Z")
I am seeing some strange behaviour with power reporting for many of my devices, quite often the power reporting will stop. example 1 - Switch has been turned off, yet still show power use ( I have even unplugged the end device to make sure). example 2 - Switch is turned on, end device is off (even unplugged) and still shows power usage. example 3 - power switch is actually on, yet shows as OFF in Homey. example 4 - power switch is on, yet show NO power consumption even through end device is on and running 100W+ Most of my devices are Aeotec Smart Switch 6, but I have seen similar issues with Fibaro switch modules as well. Does not seem to matter how far away they are from Homey, most are direct hop or max 3 hops on the z-wave network. Restarting the Aeotec app seems to bring them all back to normal function, however sometimes a reboot is required. I have also tried to adjust the power reporting values i the module itself, eg from 30W delta to 5W delta, all this did was seem to flood my z-wave network with traffic and no end result on the homey interface. Is this a known issue with Z-Wave and devices? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [November 16, 2018, 7:13am UTC](https://community.homey.app/t/issues-with-power-reporting/1207/2 "2018-11-16T07:13:13Z")
4 posts were split to a new topic: [Trouble pairing the Aeotec Smart Switches in Australia](https://community.homey.app/t/trouble-pairing-the-aeotec-smart-switches-in-australia/4117)