# Issues with Aqara FP300 **URL:** \ **Category:** Devices\ **Tags:** zigbee, homey-pro\ **Created:** [March 25, 2026, 4:23pm UTC](https://community.homey.app/t/issues-with-aqara-fp300/152944 "2026-03-25T16:23:54Z")\ **Posts on this page:** 1\ **Showing post:** 30
**Author:** ![Ken\_Hansen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ken_hansen/32/123364_2.png) [@Ken\_Hansen](https://community.homey.app/u/Ken_Hansen)\ **Post date:** [July 22, 2026, 12:21pm UTC](https://community.homey.app/t/issues-with-aqara-fp300/152944/30 "2026-07-22T12:21:51Z")
Closing the loop on this one. Placed the same reply on thread "**[Firmware problem with Aqara - Presence Multi-Sensor FP300](https://community.homey.app/t/firmware-problem-with-aqara-presence-multi-sensor-fp300/155180)"** as well. The Homey Aqara app was updated about a week ago with what appears to be the fix (explicit manuSpecificLumi binding + reporting configuration for the manufacturer-specific presence and PIR attributes) that andreas\_roedl documented on the Aqara forum and that SmartThings and Zigbee2MQTT had already implemented. One week in on my 4 FP300s: only a single hang across the entire fleet, on the lavatory unit around day 4. Otherwise stable. That’s a dramatic improvement from the every-24-hour dropout pattern we were all fighting. A few thank-yous: @TedTolboom for shipping the fix. @Peter_Kawa for the IKEA routing hypothesis and the Z2M/Home Assistant reference docs — the mesh fix (removing all IKEA TRETAKTs and replacing with ThirdReality Gen 3s) was a real improvement even before the app update. @Jason_Edwards, @Trond_Nordfjaern, and everyone else who added data points across platforms — the cross-platform evidence is what made the diagnosis convincing. And credit to Athom support (Bas) for escalating internally when the community-facing side went quiet. Leaving this here in case anyone lands on the thread searching for the FP300 24-hour dropout issue — the fix is in the Homey Aqara app, update it and give it a week. --- _[View the full topic](https://community.homey.app/t/issues-with-aqara-fp300/152944)._