# Integration with Worx Landroid mowers **URL:** \ **Category:** Ideas & Suggestions\ **Tags:** app\ **Created:** [July 22, 2020, 7:20am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663 "2020-07-22T07:20:58Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [April 24, 2022, 7:48am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/63 "2022-04-24T07:48:15Z")
So you have an red exclamation mark on the device? Martin Verbeek ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [April 24, 2022, 8:37am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/64 "2022-04-24T08:37:12Z")
I think this time I got rather empty icon with dotted box… I’ll take screenshot next time. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 17, 2022, 6:19pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/65 "2022-05-17T18:19:31Z")
Hi Martin, will those changes make it to the Homey Community store please? 😉 Thank you. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 17, 2022, 7:29pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/66 "2022-05-17T19:29:35Z")
I am debugging an issue with the mowers not coming available, think I found it, but need a couple of days more… ---
**Author:** ![Joka](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@Joka](https://community.homey.app/u/Joka)\ **Post date:** [May 28, 2022, 12:52pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/67 "2022-05-28T12:52:11Z")
Any news about the issue with the mowers not coming available? Have the same problem, device is found but red exclamation mark on the device tile. Excuse me, I got my brand new landroid and being a little bit impatient 😉 THX ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 28, 2022, 2:02pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/68 "2022-05-28T14:02:44Z")
I am trying to get it failed, but until now it does not 😳 Martin Verbeek ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 28, 2022, 3:46pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/69 "2022-05-28T15:46:53Z")
could you pm me a chunk of the log and screenshot of the device status when you select it in Homey? ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 28, 2022, 7:08pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/70 "2022-05-28T19:08:45Z")
> [@Martin\_Verbeek](#): > > trying to get it failed, but until now it does not Actually it also works for me just fine since last time I have reported :-)) Interesting. ---
**Author:** ![Joka](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@Joka](https://community.homey.app/u/Joka)\ **Post date:** [May 29, 2022, 9:40am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/71 "2022-05-29T09:40:04Z")
I was to impatient, after a firmware update the mover and your app works fine together! THX for your quick response. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 29, 2022, 9:52am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/72 "2022-05-29T09:52:04Z")
Super…any issues or requests let me know… Martin Verbeek ---
**Author:** ![Felix\_Gebhardt](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felix_gebhardt/32/16599_2.png) [@Felix\_Gebhardt](https://community.homey.app/u/Felix_Gebhardt)\ **Post date:** [May 29, 2022, 3:05pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/73 "2022-05-29T15:05:22Z")
Hey Martin, i’m a bit annoyed by my mower selecting the zone to mow on his own (based on the zone-usage-ratio I‘ve set in the Landroid-App but not really controllable). Is it technically possible to send the mower out to start in a specified zone (like „Start mowing Zone [2]“). Alternatively: is it possible to change the frequency of the zones by App command (like „set zone usage [0%,100%,0%]“)? If so, would you consider to integrate that? Cheers, Felix ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 29, 2022, 3:58pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/74 "2022-05-29T15:58:32Z")
Let me check it out. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 30, 2022, 1:59pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/75 "2022-05-30T13:59:23Z")
looks like the only way to do this, is to set the percentage for the zone you want at 100% and then start. I will try to get that 100% selection in an action card and later get more control for that selection. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [May 30, 2022, 3:12pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/76 "2022-05-30T15:12:18Z")
Version 2.3.0 is on HCS with a action card to set a specific zone to 100%, after execution add a second card with “On” including a delay of a couple of seconds, just to be sure. It will also display the percentages defined in de device tile. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 30, 2022, 6:54pm UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/77 "2022-05-30T18:54:40Z")
Martin thank you for adding additional and useful insights (voltage, temperature, inclination and gradient) - just a quick one, is it complicated to add also conditions “becomes more-less then” at least for temperature and voltage ? Insights are drawing just fine but I don’t see those conditions. Currently it is usable but the trigger will get fired multiple times until fixed… ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [June 1, 2022, 6:42am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/78 "2022-06-01T06:42:27Z")
can you try 2.3.2? ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [June 1, 2022, 11:58am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/79 "2022-06-01T11:58:34Z")
Excellent, works perfectly, thank you for adding those triggers. 😉 ---
**Author:** ![Joka](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@Joka](https://community.homey.app/u/Joka)\ **Post date:** [June 2, 2022, 9:41am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/80 "2022-06-02T09:41:37Z")
Hi Martin, do you know if the beeper can be disabled via the api? THX ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [June 5, 2022, 8:12am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/81 "2022-06-05T08:12:48Z")
> [@Joka](#): > > if the beeper can be disabled I doubt but I would suggest to contact Worx directly…I would say first of all, API would need to support it and 2nd, probably it’s mandatory safety feature… ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [June 5, 2022, 8:14am UTC](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663/82 "2022-06-05T08:14:21Z")
@Martin_Verbeek apologies, seems that voltage condition can’t be set higher to 20V? Because battery fluctuates in my case around 20.4V and actually I would like ti monitor conditions above this limit as kind of safety feature, to prevent overcharge… Btw, don’t you really think your app deserve thread in app section? 🙂 [Previous page](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663.md?page=3) [Next page](https://community.homey.app/t/integration-with-worx-landroid-mowers/32663.md?page=5)