# INNR Vintage Filament Edison **URL:** \ **Category:** Questions & Help\ **Created:** [August 27, 2023, 1:25pm UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132 "2023-08-27T13:25:44Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Sjoerd\_Hofstee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sjoerd_hofstee/32/79427_2.png) [@Sjoerd\_Hofstee](https://community.homey.app/u/Sjoerd_Hofstee)\ **Post date:** [August 27, 2023, 1:25pm UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/1 "2023-08-27T13:25:44Z")
Hi I have followed the instruction of INNR, but nothing happens. It does not connect to homey. Innr GU10 lamps do not have this problems… Is there a solution? thks Sjoerd ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [August 28, 2023, 12:55am UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/2 "2023-08-28T00:55:52Z")
It should at least connect as Homey generic zigbee device. Tell us which steps you tried, and where it stops. Which Homey model do you own? A. When you have sufficient zigbee routers (230V zigbee devices), start the pairing process near the lamp’s mounting point. A nearby zigbee router should pick up the signal; B. When you have few zigbee routers, start the pairing process of the lamp a few centimeters from Homey. From what I’ve read in the years, certain Innr devices are not very reliable slash stable zigbee products. Maybe this lamp is one of them. ---
**Author:** ![Sjoerd\_Hofstee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sjoerd_hofstee/32/79427_2.png) [@Sjoerd\_Hofstee](https://community.homey.app/u/Sjoerd_Hofstee)\ **Post date:** [August 28, 2023, 6:08am UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/3 "2023-08-28T06:08:10Z")
Hi Peter, I have brought the lamp till 50cm to the homey pro, but that didn’t work. Als another identical lamp. Strange thing is that the Innr GU10 are working directly… So, the best thing that I can do is to bring it even closer to the homey pro? rgds Sjoerd ---
**Author:** ![Henrik\_Johnsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henrik_johnsson/32/13707_2.png) [@Henrik\_Johnsson](https://community.homey.app/u/Henrik_Johnsson)\ **Post date:** [August 28, 2023, 7:27am UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/4 "2023-08-28T07:27:41Z")
Could it be that INNR have released a new variant of lamp that isn’t supported by the app? Maybe ask INNR, I think they are responsible for the app. You could also try pairing it as a generic Zigbee device to see if the lamp can be picked up at all. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [August 28, 2023, 10:55am UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/5 "2023-08-28T10:55:57Z")
> [@Sjoerd\_Hofstee](#): > > I have brought the lamp till 50cm to the homey Yeah try a few centimeters max., Sjoerd. Like mentioned before, try adding it as Homey generic zigbee device. That _should_ always work, if a light is supported or not. ![Screenshot_20230828-125507_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/d/adcf1348a84b8d0df66225e8c1a57ddbaf80e6e5.jpeg) ![Screenshot_20230828-125526_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/0/508cbbdb9a457824d3c04e850258a12a6d0830f2.jpeg) Can you show us your zigbee network? [https://tools.developer.homey.app/tools/zigbee](https://tools.developer.homey.app/tools/zigbee) ---
**Author:** ![Sjoerd\_Hofstee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sjoerd_hofstee/32/79427_2.png) [@Sjoerd\_Hofstee](https://community.homey.app/u/Sjoerd_Hofstee)\ **Post date:** [September 8, 2023, 10:00am UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/6 "2023-09-08T10:00:38Z")
Hi, I tried it as you advise: a centimeter from the Homey Pro, but without result. I will check with Innr Thks Sjoerd **Verzonden:** maandag 28 augustus 2023 03:06 > ![](https://sea1.discourse-cdn.com/flex015/user_avatar/community.homey.app/peter_kawa/45/84520_2.png) > > | > > [**Peter\_Kawa**](https://community.homey.app/u/peter_kawa) Regular > August 28 > > | > > - | - | It should at least connect as Homey generic zigbee device. Tell us which steps you tried, and where it stops. Which Homey model do you own? A. When you have sufficient zigbee routers (230V zigbee devices), start the pairing process near the lamp’s mounting point. A nearby zigbee router should pick up the signal; B. When you have few zigbee routers, start the pairing process of the lamp a few centimeters from Homey. From what I’ve read in the years, certain Innr devices are not very reliable slash stable zigbee products. Maybe this lamp is one of them. ---
**Author:** ![Sjoerd\_Hofstee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sjoerd_hofstee/32/79427_2.png) [@Sjoerd\_Hofstee](https://community.homey.app/u/Sjoerd_Hofstee)\ **Post date:** [September 8, 2023, 10:02am UTC](https://community.homey.app/t/innr-vintage-filament-edison/88132/7 "2023-09-08T10:02:18Z")
Hi It doesn’t react on any lamp… I will contact INNR Thks Sjoerd