# IKEA Dimmer problem

**URL:** https://community.homey.app/t/ikea-dimmer-problem/44074
**Category:** Devices
**Created:** [March 4, 2021, 6:02pm UTC](https://community.homey.app/t/ikea-dimmer-problem/44074 "2021-03-04T18:02:39Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)
#### Post date: [March 4, 2021, 6:22pm UTC](https://community.homey.app/t/ikea-dimmer-problem/44074/2 "2021-03-04T18:22:34Z")

</div>

I have seen the same Issue,  
and it is also reported here:

> [@Multiple Ikea TRÅDFRI drivers (transformer) and two square dimmers](https://community.homey.app/t/multiple-ikea-tradfri-drivers-transformer-and-two-square-dimmers/35474):
>
> I’m trying to configure the following scenario (with homey v5): Room1= two TRÅDFRI drivers (alias nr 1.1 and nr 1.2) with LED-spots connected to them and controlled by square dimmer (alias nr 1) AND of course also through homey. Room2= one TRÅDFRI driver (alias nr 2.1) with LED-spots connected to them and controlled by square dimmer (alias number 2) AND of course also through homey. I’ve tried many different setup procedures but can’t get it to work. First setup procedure one room at a…

There are also possible workarounds mentioned, (Like the Tradfri HUB as gateway) But I also would like to function it as expected in Homey

Please Report to Athom support, I think Athom has to fix in the Zigbee - Homey Firmware or in the Tradfri App.

> To keep it centralized I will close this Topic.

---

_[View the full topic](https://community.homey.app/t/ikea-dimmer-problem/44074)._