# Howto include the Zipato bulb 2? **URL:** \ **Category:** Devices\ **Created:** [December 14, 2020, 10:00pm UTC](https://community.homey.app/t/howto-include-the-zipato-bulb-2/39190 "2020-12-14T22:00:20Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![1stRuud](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/1struud/32/118857_2.png) [@1stRuud](https://community.homey.app/u/1stRuud)\ **Post date:** [December 14, 2020, 10:00pm UTC](https://community.homey.app/t/howto-include-the-zipato-bulb-2/39190/1 "2020-12-14T22:00:20Z")
I want ot include the bulb 2 from Zipato. Ik think i have followed all instructions: - installed the zipato app - the bulb was less than 20 cm away from homey - at the intruction to swich on the bulp (what i did) the bulp flashed and moved to 5% (= exclusion) - at the instruction to swich on the bulb again (what i did) the bulb flashed 2x (= reset) and after a few seconds the bulb flashed 1x (=inclusion mode) After waiting for more than one minute i get the message _something wend wrong during adding […] try again (but than in dutch)_ I did ths now already 10+ times with different bulbs but the problem persists. can someone tell me what i do wrong? ---
**Author:** ![1stRuud](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/1struud/32/118857_2.png) [@1stRuud](https://community.homey.app/u/1stRuud)\ **Post date:** [December 16, 2020, 5:40pm UTC](https://community.homey.app/t/howto-include-the-zipato-bulb-2/39190/2 "2020-12-16T17:40:22Z")
I found the solution and i will share it with all of you who had the same problem: reset the bulb by turning the bulb on 6 times within 6 seconds (The bulb will flash one time and after a small time double flash) _ **turn the bulb off!** _ start the app and press the + sign (add a device), Select Zipato and Bulb2 Turn the bulb on when requested (The bulb will double-flash and dim to 5%) Turn the bulb off and on when requested (The bulb will flash and dubble flash) wait a bit longer and the bulb will be added