# How to get logs for specific device **URL:** \ **Category:** Questions & Help\ **Tags:** homeyscript, homey-pro\ **Created:** [March 19, 2024, 7:52am UTC](https://community.homey.app/t/how-to-get-logs-for-specific-device/106592 "2024-03-19T07:52:53Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [March 19, 2024, 10:32am UTC](https://community.homey.app/t/how-to-get-logs-for-specific-device/106592/6 "2024-03-19T10:32:18Z")
> [@NicoEk](#): > > By the way, I do have IKEA remotes, but shouldn’t they show as the source of the “turning on” event? No. > [@](#): > > Also, for that to happen, it should be part of a flow which triggers this event when the IKEA Switch Button was pressed or not? Also no. In fact, the remote doesn’t even have to be in the same Zigbee network. The issue is that some remotes send broadcast messages to particular Zigbee group ID’s by default, and some devices also listen to those group ID’s by default. I don’t know about INNR, but it’s a (relatively) well-known issue between IKEA and Aqara (see [this Dutch post](https://community.homey.app/t/ikea-tradfri-remote-opent-aqara-gordijnen/56893), and there are a few more but can’t find them at the moment). Other Zigbee implementations work around that issue by automatically “unsubscribing” such devices from those groups when they get paired (but Homey doesn’t support that AFAIK). > [@](#): > > Edit: The only flow where these bulb is part of is this one. If that gets triggered all Bulbs in the Zone “Büro” should turn on, but it are always only some random ones. That’s “normal” for Homey, at least with the old Homey Pro. It cannot handle sending lots of messages. --- _[View the full topic](https://community.homey.app/t/how-to-get-logs-for-specific-device/106592)._