# How to get label to reflect actual alarm?

**URL:** <https://community.homey.app/t/how-to-get-label-to-reflect-actual-alarm/100914>\
**Category:** Flows\
**Created:** [January 12, 2024, 1:56pm UTC](https://community.homey.app/t/how-to-get-label-to-reflect-actual-alarm/100914 "2024-01-12T13:56:38Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![anon78407409](https://avatars.discourse-cdn.com/v4/letter/a/e274bd/32.png) [@anon78407409](https://community.homey.app/u/anon78407409)\
**Post date:** [January 12, 2024, 2:10pm UTC](https://community.homey.app/t/how-to-get-label-to-reflect-actual-alarm/100914/3 "2024-01-12T14:10:16Z")

</div>

Thanks!  
So I guess I’ll have to go with a similar solution to my other thread as well:

> [@Flow for turning off heating source if window is open](https://community.homey.app/t/flow-for-turning-off-heating-source-if-window-is-open/99967/2):
>
> Hi @DIYglenn , I am not sure, if I understand you right. For many sensors there is a If… card IsOpen for xxx minutes as well as IsClosed or similar and for the heating system there should be some cards to switch them on and off or to change temperature. With simple cards you must write one Flow for WindowOpen and one for WindowClosed, If you have several windows in the same room you may use cards on the zone where you put the devices. I do not have those sensors so I do not know how exactly …

I kinda miss a “If this **sensor** is active in this **zone** - Then in the same **zone** enable/disable this **device** ”

---

_[View the full topic](https://community.homey.app/t/how-to-get-label-to-reflect-actual-alarm/100914)._