# Homeyduino no update of trigger after update to new pro 2023

**URL:** <https://community.homey.app/t/homeyduino-no-update-of-trigger-after-update-to-new-pro-2023/93984>\
**Category:** Apps\
**Tags:** homeyduino\
**Created:** [November 7, 2023, 6:42pm UTC](https://community.homey.app/t/homeyduino-no-update-of-trigger-after-update-to-new-pro-2023/93984 "2023-11-07T18:42:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Slof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slof/32/1318_2.png) [@Slof](https://community.homey.app/u/Slof)\
**Post date:** [November 7, 2023, 6:42pm UTC](https://community.homey.app/t/homeyduino-no-update-of-trigger-after-update-to-new-pro-2023/93984/1 "2023-11-07T18:42:49Z")

</div>

After I moved al my devices from my 2016 towards the new pro 2023 I have some problems with the updating of the values with a trigger from the ESP device.

This is the line on the arduino:  
Homey.trigger(“temperature2”, tempDev[1]);

I’m reading it the same as on the old one:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/d/6d42f12f3384dadd245e555f2d846404d78faa49.png)

But sometimes it takes a while for the value to change.

---

<div class="post-metadata">

**Author:** ![Slof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slof/32/1318_2.png) [@Slof](https://community.homey.app/u/Slof)\
**Post date:** [November 7, 2023, 6:46pm UTC](https://community.homey.app/t/homeyduino-no-update-of-trigger-after-update-to-new-pro-2023/93984/2 "2023-11-07T18:46:38Z")

</div>

The trigger is by the way send when the temperature is changed for 0.2 degrees. Which always worked fine.  
I don’t hope I need to change the arduino software so that it is always sending every X-seconds, because there build in good 😉

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [November 8, 2023, 12:01pm UTC](https://community.homey.app/t/homeyduino-no-update-of-trigger-after-update-to-new-pro-2023/93984/3 "2023-11-08T12:01:38Z")

</div>

I don’t use the Homeyduino, have no idea about Arduino and haven’t searched the forum for similar problems, but it sounds like a app problem to me.  
And if you can exclude own mistakes and have already tried a few things, e.g. recreating this flow, restarting the app, restarting Homey, and were unable to solve the problem that way, I would therefore suggest to contact Athom, the developer of the App.

---

<div class="post-metadata">

**Author:** ![Slof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slof/32/1318_2.png) [@Slof](https://community.homey.app/u/Slof)\
**Post date:** [November 9, 2023, 2:26pm UTC](https://community.homey.app/t/homeyduino-no-update-of-trigger-after-update-to-new-pro-2023/93984/4 "2023-11-09T14:26:15Z")

</div>

Thanks, I allready solved it.

Deleting and re-adding them did the trick for now.  
Maybe it was still wanted to send some data to the old Homey which allready is off.