# \[Homeyduino\] E-paper for Homey

**URL:** <https://community.homey.app/t/homeyduino-e-paper-for-homey/74640>\
**Category:** Devices\
**Created:** [January 5, 2023, 3:37pm UTC](https://community.homey.app/t/homeyduino-e-paper-for-homey/74640 "2023-01-05T15:37:04Z")\
**Posts on this page:** 4\
**Page:** 23

<div class="post-metadata">

**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\
**Post date:** [September 12, 2025, 5:16am UTC](https://community.homey.app/t/homeyduino-e-paper-for-homey/74640/450 "2025-09-12T05:16:17Z")

</div>

Also check this topic. It contains info on how to connect the screen to Homey:

> [@New e-paper display non-DIY with Homey integration](https://community.homey.app/t/new-e-paper-display-non-diy-with-homey-integration/142789):
>
> I’ve been looking for a simple screen for a while now to have a clean, unobtrusive dashboard on my desk. An e-paper screen could meet this need, but the devices I found were always DIY. Since I’m not technical enough for that, I never bought an e-paper screen, until now… This week, my eye was caught by a screen from Seeed Studio, the [reTerminal E1001](https://www.seeedstudio.com/reTerminal-E1001-p-6534.html) monochrome. It’s a ready-to-use device with a 7.5-inch screen with a screen refresh time of 2 seconds., 800x480 resolution, an ESP32-S3 processor,…

---

<div class="post-metadata">

**Author:** ![Chen1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chen1/32/120866_2.png) [@Chen1](https://community.homey.app/u/Chen1)\
**Post date:** [September 12, 2025, 5:36am UTC](https://community.homey.app/t/homeyduino-e-paper-for-homey/74640/451 "2025-09-12T05:36:03Z")

</div>

Thank you so much!

---

<div class="post-metadata">

**Author:** ![Amersfoort](https://avatars.discourse-cdn.com/v4/letter/a/94ad74/32.png) [@Amersfoort](https://community.homey.app/u/Amersfoort)\
**Post date:** [September 17, 2025, 8:37am UTC](https://community.homey.app/t/homeyduino-e-paper-for-homey/74640/452 "2025-09-17T08:37:36Z")

</div>

I just shared my first experiences on [New e-paper display non-DIY with Homey integration](https://community.homey.app/t/new-e-paper-display-non-diy-with-homey-integration/142789/8). Could you share your experiences once you have the reTerminal E1001 at your disposal?

---

<div class="post-metadata">

**Author:** ![KSBahorie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ksbahorie/32/81630_2.png) [@KSBahorie](https://community.homey.app/u/KSBahorie)\
**Post date:** [January 4, 2026, 10:05pm UTC](https://community.homey.app/t/homeyduino-e-paper-for-homey/74640/453 "2026-01-04T22:05:05Z")

</div>

> [@sebyldino](#):
>
> ![Maquette](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/f/8f90a94594191d4e5b316b611981af2123d7a48b.jpeg)

@sebyldino Is it possible to create flows and start this with the touchscreen of the LILYGO T5 e-Paper 4.7 Inch ESP32-S3?  
In other words, when I touch (click) on flow 1 (in your example), flow 1 will start on Homey?

[Previous page](https://community.homey.app/t/homeyduino-e-paper-for-homey/74640.md?page=22)