# Homey pro und Fibaro Smart Implant

**URL:** <https://community.homey.app/t/homey-pro-und-fibaro-smart-implant/102684>\
**Category:** Geräte\
**Tags:** homey-pro\
**Created:** [January 29, 2024, 9:06pm UTC](https://community.homey.app/t/homey-pro-und-fibaro-smart-implant/102684 "2024-01-29T21:06:05Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [January 31, 2024, 12:34pm UTC](https://community.homey.app/t/homey-pro-und-fibaro-smart-implant/102684/6 "2024-01-31T12:34:51Z")

</div>

Wäre interessant zu wissen was Du genau versucht hast. Ist Dein SI mit oder ohne Sicherheitsmodi inkludiert?

Falls Du in dem verlinkten Topic nicht weitergelesen hast, in diesem Post ist es ziemlich deutlich erklärt:

> [@Seperate the input from output - Fibaro Smart Implant](https://community.homey.app/t/seperate-the-input-from-output-fibaro-smart-implant/28950/46):
>
> You send the same on and off value to the device (the last 4 values), just the “address/floor” is different where the value should be delivered. Let me explain it like this: The Smart implant sensor is a building with 7 floors. Each floor has people with their own purpose. On the main floor there is a front desk where we (Homey) can deliver off messages (for the device to do). We send a message, which is (the last) 4 values: 0x75, 0x01, 0x02, 0x00 (to seperate) 0x75, 0x01, 0x00, 0x00 (to …

Ich habe die Ein-/Ausgänge an meinem SI auch nach dieser Anleitung separiert.

---

_[View the full topic](https://community.homey.app/t/homey-pro-und-fibaro-smart-implant/102684)._