# Homey Pro 2023 with 500 zigbee device **URL:** \ **Category:** Questions & Help\ **Tags:** zigbee, devices, homey-pro, homey-bridge\ **Created:** [May 19, 2023, 5:59am UTC](https://community.homey.app/t/homey-pro-2023-with-500-zigbee-device/80738 "2023-05-19T05:59:28Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Bhavesh\_Bhagat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bhavesh_bhagat/32/55891_2.png) [@Bhavesh\_Bhagat](https://community.homey.app/u/Bhavesh_Bhagat)\ **Post date:** [May 19, 2023, 9:26am UTC](https://community.homey.app/t/homey-pro-2023-with-500-zigbee-device/80738/5 "2023-05-19T09:26:13Z")
Thanks for the elaborated details. The setup is only for an apartment, however since now we are able to get zigbee smart CCT drivers all the downlights are getting connected to this drivers thus those itself are making a count of 200nos 200 nos - zigbee drivers 75 nos - zigbee switches and relay sockets 75 nos - battery door, light, temp, vibration, motion, water leakage, fire, gas 10 nos - door lock 20 nos - powered wifi occupancy sensors 10 nos - wifi IR blaster 20 nos - zigbee mcb 10 nos - aeotec range extender Though a Less number of apps are used since all are tuya, aqara devices, but good number of advance flows, zones, variable and time line, but ofcourse half then yours. Since the major load is of lighting devices, i was thinking if there is any kind of Hybrid solution in which i could connect all the lights wired via DALI2, and bring them in homey controller to group, trigger and automate. --- _[View the full topic](https://community.homey.app/t/homey-pro-2023-with-500-zigbee-device/80738)._