# Homey Pro (2023) v13 Multi-PAN Zigbee Queue Lockup & 90-97% TX Failures

**URL:** <https://community.homey.app/t/homey-pro-2023-v13-multi-pan-zigbee-queue-lockup-90-97-tx-failures/161716>\
**Category:** Questions & Help\
**Created:** [November 3, 2026, 8:20am UTC](https://community.homey.app/t/homey-pro-2023-v13-multi-pan-zigbee-queue-lockup-90-97-tx-failures/161716 "2026-11-03T08:20:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![pa12345](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pa12345/32/168227_2.png) [@pa12345](https://community.homey.app/u/pa12345)\
**Post date:** [November 3, 2026, 8:20am UTC](https://community.homey.app/t/homey-pro-2023-v13-multi-pan-zigbee-queue-lockup-90-97-tx-failures/161716/1 "2026-11-03T08:20:31Z")

</div>

Hi everyone,

I’m struggling with severe Zigbee instability on my Homey Pro (2023) running firmware v13.5.3 (Multi-PAN stack). Despite trying exhaustive troubleshooting (overnight power-offs, minimal setups, device re-pairings, and full firmware re-flashes via USB recovery), the network remains completely stalled.

Symptoms:

- TX failure rates are through the roof (90%–97%) on both battery sensors and mains routers.
- Command queue is constantly blocked / timing out.
- State desync: Manual button presses on devices (like IKEA/Tuya plugs) instantly update the app, but sending commands _from_ the app to the devices always fails with communication errors.
- Certain older devices (like a long-standing Tuya plug) seem to flood the queue, but even clean IKEA plugs fail to respond.

Has anyone found a stable workaround or fix for the v13 Multi-PAN queue lockup without doing a full Zigbee network reset? Any advice or developer insights would be greatly appreciated!