# Homey Pro 2023 firmware 10.3.0 - zigbee is broken **URL:** \ **Category:** Questions & Help\ **Tags:** homey-pro\ **Created:** [February 15, 2024, 10:10pm UTC](https://community.homey.app/t/homey-pro-2023-firmware-10-3-0-zigbee-is-broken/104089 "2024-02-15T22:10:27Z")\ **Posts on this page:** 1\ **Showing post:** 122
**Author:** ![Floppus](https://avatars.discourse-cdn.com/v4/letter/f/898d66/32.png) [@Floppus](https://community.homey.app/u/Floppus)\ **Post date:** [March 14, 2024, 6:52pm UTC](https://community.homey.app/t/homey-pro-2023-firmware-10-3-0-zigbee-is-broken/104089/122 "2024-03-14T18:52:38Z")
Athom confirmed development is working on Zigbee issues to people with 2023 and with 2019 version. Chips were flashed, no banana. > [@Homey don't find zigbee units after last updated to version 10.0.6(09.02.2024)](https://community.homey.app/t/homey-dont-find-zigbee-units-after-last-updated-to-version-10-0-6-09-02-2024/103620/73): > > Thank you for your reply. This issue has already been reported by other users. I can’t give any guarantees on when this issue will be found and resolved, but please know that it has been forwarded to our development team and it will be investigated. We hope to resolve this issue as soon as possible. Thanks again for your input and for reporting the issue, we appreciate it! For now this is all I can do for you, which is why I’m closing your ticket. If you need additional support, please feel f… > [@Very unstable setup with many routers](https://community.homey.app/t/very-unstable-setup-with-many-routers/95741/31): > > This was a very interesting read. I’m having the exact same problems as you and have about 35 router devices and only 3-4 end devices in my network. My router devices are sockets, dimmers, thermostats and switches from ELKO, and I’m using the ELKO Smart app for Homey Pro. Everything seems to work flawlessly up to 10-15 devices, but after that when adding more devices the network starts crashing at a frequency proportional to the number of added devices it seems like. After talking with Homey Su… > [@Homey Pro (Early 2019) Zigbee broken](https://community.homey.app/t/homey-pro-early-2019-zigbee-broken/104227/6): > > Thanks Floppus, for me it seemed the Zigbee network did not even start (driver could not be loaded). In the meantime the Homey does not even start up anymore it seems: not LED ring lighting up when the power goes in, only some buzzing noise from the speaker when I put my ear next to it. @robertklep I’ll contact Homey, hopefully something can be fixed still. Also have no backups. confused > [@Zigbee dead after power failure](https://community.homey.app/t/zigbee-dead-after-power-failure/81412/13): > > it have worked a few times after longer power failure with the fix linked previous in the thread by @Daniel_S . today it is not, have done a software download a couple of times but zigbee still dead. is it reset zigbee network that is the only option now? > [@Device reported as having left the Zigbee network but is still working](https://community.homey.app/t/device-reported-as-having-left-the-zigbee-network-but-is-still-working/104995/6): > > I’ve been dealing with this issue for a long time now. I was happy to see the relases of new firmware but the bad news is that firmware version 10.3.1 has not fixed the problem for me. I just had two devices leaving the network. It mostly concerns philips hue devices ( RWL021 and SML001). Could the ‘philips hue without the bridge’ app be causing this? I have 4 routers in my network and no wifi channels are close to the zigbee channel. As reported before the devices are still active. [image] T… They really need to get some public posts on the known issues. Previous topics on the subject seem to have gone, but there is a confirmed issue for both. --- _[View the full topic](https://community.homey.app/t/homey-pro-2023-firmware-10-3-0-zigbee-is-broken/104089)._