# \[Homey Pro 2023/2026/mini\] Informationen und Diskussionen zu neuen Firmware-Updates **URL:** \ **Category:** 🇩🇪 Deutsch (German)\ **Tags:** firmware, homey-pro-2023, homey-pro-mini, homey-pro-2026\ **Created:** [March 22, 2023, 10:29am UTC](https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211 "2023-03-22T10:29:31Z")\ **Posts on this page:** 1\ **Showing post:** 690
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 22, 2026, 9:55am UTC](https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211/690 "2026-05-22T09:55:24Z")
Den hatte ich gestern bereits neu gestartet und gerade eben erst nachgeschaut. Aktuelle Betriebszeit 17 Stunden: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/c/bc7d6c9001cf945ecc08031003bfbe2e97cf8766.png) Trotzdem schließe ich nicht aus, dass mit der Zeit neue _ **Unknown Nodes** _ auftauchen werden. Schließlich ist das gestern vor dem Neustart ja passiert. Es häufen sich übrigens auch Meldungen mit Zigbee als auch Z-Wave Problemen nach dem Firmwareupdate auf v13.2.0: – [Firmware 13.2 Zigbee issues](https://community.homey.app/t/firmware-13-2-zigbee-issues/155186) – [Z Wave not working after updating to 13.2.0](https://community.homey.app/t/z-wave-not-working-after-updating-to-13-2-0/155178) Hier noch weitere Fehlermeldung aus dem Aqara Topic, zum Teil mit unterschiedlichen Geräten: > [@\[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/7140): > > Since Homey v13.2.0 update got installed this morning my Aqara T2 dual relay’s which control my overhead lights in my office keep blinking off and then on without a real noticeable interval, but often enough that is annoying. I have the T2 configured as a ‘plugged in Lamp’ that switches the output 1 to send power to my skylights. The T2 is configured to reset to the previous state after a power break but that is not actually happening. In the homey log of the device the ‘blink’ is also not logge… > [@\[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/7141): > > I am having the same issue, the Aqara T2 dual relay power cycling every 15-45 sec randomly, on either relay when they are turned on. I did the same test as you - turning on the relays then powering off Homey Pro seem to stop the power cycling, so the issue is definitely related to the new Homey update. > [@\[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/7143): > > Since the homey update this morning, both of my T1 LED strips are not responding to anything at all frowning > [@\[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/7146): > > same here. Smart plugs not functioning. wall switch not responding most of the time. but also working on other moments. never had any problems with aqara smart plugs > [@\[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/7148): > > Same problem here with my FP300’s (ZigBee). All of them were stuck in motion and/or presence detected. Tried rebooting everything, repairing the FP300’s with limited success. One of them is still stuck even after repeated repairing attempts. --- _[View the full topic](https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211)._