# \[Homey Pro 2023/2026/mini\] Informationen und Diskussionen zu neuen Firmware-Updates

**URL:** <https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211>\
**Category:** 🇩🇪 Deutsch (German)\
**Tags:** firmware, homey-pro-2023, homey-pro-mini, homey-pro-2026\
**Created:** [March 22, 2023, 10:29am UTC](https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211 "2023-03-22T10:29:31Z")\
**Posts on this page:** 1\
**Showing post:** 680

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [May 20, 2026, 3:07pm UTC](https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211/680 "2026-05-20T15:07:21Z")

</div>

> Homey Pro v13.2.0 has been released to the **stable** channel.
> 
> **Core**
> 
> - Updates translations.
> 
> **Zigbee**
> 
> - Adds support for viewing routes in Developer Tools.
> 
> **Z-Wave**
> 
> - Official Z-Wave certified implementation.
> - Updated Z-Wave chip firmware to version 7.21.6.
> - Added SmartStart support. Devices can be added by scanning a QR code or by entering the DSK.
> - Added support for controlling door locks and thermostat mode/setpoint from the default Z-Wave device.
> - Added S2 multicast security support.
> - S2 now grants all requested security keys (except S0) instead of only the highest.
> - S0 can be enabled from the advanced settings when pairing a default Z-Wave device. Disabled by default.
> - If security bootstrapping fails during pairing, the user is informed and the node will be removed.
> - Improved handling of multiple decryption attempts for multiple security keys.
> - Incoming messages with too low or no security level are now ignored.
> - Associations are now validated against the destination node’s supported security and command classes.
> - Return routes are correctly assigned when adding associations.
> - When a node is removed from the network, corresponding associations on other nodes are also removed.
> - Association group names are now retrieved from the node and shown in the device settings screen when not defined by the app.
> - Battery devices are now correctly and faster put back to sleep when there is no more data for them.
> - When changing settings of a battery device, an estimation is given for when the device will wake up. The result is shown in the timeline.
> - When changing settings or associations on battery devices, the result is shown in the timeline after the device wakes up.
> - If a device sends a Device Reset Locally notification, it is removed from Homey after verification.
> - Added Inclusion Controller support.
> - Improved Security S0 handling.
> - Improved Transport Service handling.
> 
> **Developer Tools**
> 
> - Healing a Z-Wave node now also updates return routes for all association destinations.
> - Added ‘Update Z-Wave Routes’ feature that performs a neighbor discovery of all non-battery Z-Wave nodes and assigns new return routes when needed.
> - Added ‘Identify Z-Wave Node’ feature. The node will flash a light or make a sound.
> - Testing a Z-Wave node now sends a NOP command instead of BASIC GET.
> - The list of pending Z-Wave SmartStart inclusions is now shown and new entries can be added.
> - When the Z-Wave network is reset, a Device Reset Locally notification is sent to nodes in the Lifeline group.

Erscheinungsdatum: 20.05.2026

---

_[View the full topic](https://community.homey.app/t/homey-pro-2023-2026-mini-informationen-und-diskussionen-zu-neuen-firmware-updates/78211)._