# Homey bridge antennas **URL:** \ **Category:** Devices\ **Tags:** z-wave, zigbee, devices, homey-bridge\ **Created:** [January 3, 2023, 8:18pm UTC](https://community.homey.app/t/homey-bridge-antennas/74550 "2023-01-03T20:18:54Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![DAaviide](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daaviide/32/67092_2.png) [@DAaviide](https://community.homey.app/u/DAaviide)\ **Post date:** [January 3, 2023, 8:18pm UTC](https://community.homey.app/t/homey-bridge-antennas/74550/1 "2023-01-03T20:18:54Z")
how far do the antennas from the homey bridge reach? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [January 3, 2023, 8:46pm UTC](https://community.homey.app/t/homey-bridge-antennas/74550/2 "2023-01-03T20:46:21Z")
That depends on the frequency / protocol and many thing that could interfere in your home. It just complies to the regulations (like FCC) for the acceptable transmit power and interferences. So there is no single correct answer to your question. ---
**Author:** ![DAaviide](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daaviide/32/67092_2.png) [@DAaviide](https://community.homey.app/u/DAaviide)\ **Post date:** [January 3, 2023, 9:16pm UTC](https://community.homey.app/t/homey-bridge-antennas/74550/3 "2023-01-03T21:16:55Z")
thanks for the answer i expected there to be no real answer. are there no reports with optimal values? Liebe Grüsse Davide Müllhaupt ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [January 4, 2023, 12:29am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/4 "2023-01-04T00:29:22Z")
Look at the specs of the bridge. ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [January 4, 2023, 7:34am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/5 "2023-01-04T07:34:30Z")
Antennas don’t have a range, it all comes down to transmission power, receiver sensitivity, interference, losses, etc. Why are you asking? ---
**Author:** ![DAaviide](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daaviide/32/67092_2.png) [@DAaviide](https://community.homey.app/u/DAaviide)\ **Post date:** [January 4, 2023, 7:52am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/6 "2023-01-04T07:52:46Z")
because i connected motion sensors. and they suddenly didn’t make any realtion mer until i reconnected them again Liebe Grüsse Davide Müllhaupt ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [January 4, 2023, 7:56am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/7 "2023-01-04T07:56:33Z")
> [@DAaviide](#): > > because i connected motion sensors. and they suddenly didn’t make any realtion mer until i reconnected them again That’s very likely caused by something else. You don’t mention the brand, but others have had issues with Aqara sensors that suddenly stop updating. Also, assuming they are Zigbee or Z-Wave, the stability of your devices depends on how well your Zigbee/Z-Wave network is set up. ---
**Author:** ![DAaviide](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daaviide/32/67092_2.png) [@DAaviide](https://community.homey.app/u/DAaviide)\ **Post date:** [January 4, 2023, 8:20am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/8 "2023-01-04T08:20:26Z")
yes its a awara sensor. maybe i have to replace them, or is there maybe an update in the future? Liebe Grüsse Davide Müllhaupt ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [January 4, 2023, 8:33am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/9 "2023-01-04T08:33:56Z")
The Aqara sensors can be difficult, especially with Homey, and they don’t always work well with other brands (some people have noticed that they don’t work very well with some IKEA lights, for example). Since it’s very likely not a bug in the Aqara app, you have to wait for Athom to acknowledge that there might be a problem, which might never happen, so best bet is probably to replace them. ---
**Author:** ![DAaviide](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daaviide/32/67092_2.png) [@DAaviide](https://community.homey.app/u/DAaviide)\ **Post date:** [January 4, 2023, 10:38am UTC](https://community.homey.app/t/homey-bridge-antennas/74550/10 "2023-01-04T10:38:31Z")
okey thanks for the information. i think i will replace them Liebe Grüsse Davide Müllhaupt