# Homematic IP thermostat heads Evo connected to Home Assistant/Raspberry Pi **URL:** \ **Category:** Questions & Help\ **Created:** [December 9, 2025, 8:02pm UTC](https://community.homey.app/t/homematic-ip-thermostat-heads-evo-connected-to-home-assistant-raspberry-pi/146637 "2025-12-09T20:02:27Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 9, 2025, 9:46pm UTC](https://community.homey.app/t/homematic-ip-thermostat-heads-evo-connected-to-home-assistant-raspberry-pi/146637/2 "2025-12-09T21:46:39Z")
You most probably use the “official” app? I can recommend the [Home Assistant community app](https://community.homey.app/t/71477) for 100%. I’m using it since the early test releases. In case you miss an entity, you can add it afterwards! Even entities from other devices! Example: > [@\[APP\]\[Pro\] Home Assistant - Community App](https://community.homey.app/t/app-pro-home-assistant-community-app/71477/1388): > > Mobile: Go to device settings, Maintenance \> Try to Repair Web: Right click \> Repair Next, Add entity Now enter a part of the name of temperature entity, or the type; “target” should get you results. When you notice the desired entity, select it Next, adjust the proposed Homey capability; erase it and enter “target” or “temp”. Now the target\_temperature shows \> select it … --- _[View the full topic](https://community.homey.app/t/homematic-ip-thermostat-heads-evo-connected-to-home-assistant-raspberry-pi/146637)._