# Help with Homey & OXT RGBCCT Zigbee Controller (ts0502B) — Basic Controls Not Working

**URL:** <https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487>\
**Category:** Devices\
**Created:** [August 12, 2025, 12:03pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487 "2025-08-12T12:03:37Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 12, 2025, 12:03pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/1 "2025-08-12T12:03:37Z")

</div>

Hey everyone,

I’m reaching out for advice on integrating a **Zigbee LED controller** into my Homey setup. The device in question is the **OXT LED RGBCCT 12‑24 V SD Zigbee+RF Hue Tuya (model LC031)**—you might also see it referred to as **“ts0502B”** or by its manufacturer identifier **“\_TZB210\_nfzrlz29.”**

Here’s what’s happening:

- Homey recognizes it as a **“Generic Zigbee device,”** which is promising.

- But unfortunately, even the simplest functions— **on/off control** and **dimming** —don’t work at all.

To be precise, when doing on/off in homey app - the small led on controler blinks - so it receives the signal.

I’ve tried removing and re-pairing the device, and even restarting it, but nothing changes.

Has anyone successfully integrated this exact controller (or a similar one) with Homey?

Also curious if there’s a better driver or zigbee app I could try that’s known to support ts0502B or this type of RGBCCT controller.

Thanks so much for any help.  
Link: [Tuya - RGBW+CCT 5in1 LED strip and ribbon controller - ZigBee/RF SD - Android/iOS app - OXT LC031 Botland - Robotic Shop](https://botland.store/led-strips-panels-drivers/24921-tuya-rgbwcct-5in1-led-strip-and-ribbon-controller-zigbeerf-sd-androidios-app-oxt-lc031-5904496823134.html)

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 13, 2025, 7:19am UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/2 "2025-08-13T07:19:17Z")

</div>

Bumping this.

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [August 13, 2025, 7:23am UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/3 "2025-08-13T07:23:46Z")

</div>

After not even waiting a day?

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 13, 2025, 6:06pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/4 "2025-08-13T18:06:35Z")

</div>

After few repairing on/off started working.  
Trying to do the dim, kind of breaks the flow, and on/off stops working for a few mins. And works back afterwards.

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [August 13, 2025, 6:10pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/5 "2025-08-13T18:10:18Z")

</div>

Those are issues that an app is most likely not able to fix, as they sound like low-level Zigbee issues. Apps only have (very) high-level access to Zigbee, all the rest is handled by Homey itself.

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 13, 2025, 6:24pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/6 "2025-08-13T18:24:58Z")

</div>

I was able to capture the issue. On the video, I change the on off values in dev tools, and after changing the dim value it crashes.

Attaching the video:

Link[Link](https://www.dropbox.com/scl/fi/chs0bzyj18qudbkdsqb2t/Wideo-13.08.2025-20-20-30.mov?rlkey=lxa48b9dc7owywtnexodlth8s&st=1jo5ofm9&dl=0)

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [August 13, 2025, 6:34pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/7 "2025-08-13T18:34:08Z")

</div>

Time to find a better controller 🤷🏼‍♂️

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 13, 2025, 7:17pm UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/8 "2025-08-13T19:17:42Z")

</div>

I won’t give up that easily lol! After troubleshooting I found out it actually works!! to be precise. The dimming works after one or two minutes it got triggered, after it gets triggered everything freezes for a two minutes then then again both on and off works OK without any delays and dimming stops everything for two minutes it looks like a performance issue

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 15, 2025, 8:24am UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/9 "2025-08-15T08:24:18Z")

</div>

Update on this!  
I’ve cloned the Tuya app, and added the device above to have more troubleshooting options.

The scenario I am using for reproducing the issue is:  
Happy path:

1/ On  
2/ Off  
Result: No delays

Issue:  
1/On  
2/ Dim  
→ Freeze happens  
3/ Off  
4/ On

After running this scenario, I am getting below error from the console:

```auto
  zigbee-clusters:endpoint ep: 1, cl: time (10), error while handling frame binding_unavailable {
  meta: { dstEndpoint: 1 },
  frame: ZCLStandardHeader {
    frameControl: Bitmap [],
    trxSequenceNumber: 174,
    cmdId: 0,
    data: <Buffer 07 00>
  }
} +2m

```

Do you know what does it mean?

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 15, 2025, 8:39am UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/10 "2025-08-15T08:39:15Z")

</div>

One more thing:  
During “freeze” time, when triggering on/off. It is recorded in a console, but not reflected on z Led strip:

```auto
zigbee-clusters:cluster ep: 1, cl: onOff (6) received frame defaultResponse onOff.defaultResponse { cmdId: 0, status: 'SUCCESS' } +90ms
2025-08-15T08:36:27.033Z [log] [ManagerDrivers] [Driver:rgb_led_strip_controller] [Device:174731e7-fbc9-4428-8498-d8b99a49decb] changeOnOff() → true
  zigbee-clusters:cluster ep: 1, cl: onOff (6) send frame ZCLStandardHeader {
  frameControl: ['clusterSpecific'],
  data: <Buffer >,
  cmdId: 1,
  trxSequenceNumber: 60
} +1s
  zigbee-clusters:cluster ep: 1, cl: onOff (6) received frame defaultResponse onOff.defaultResponse { cmdId: 1, status: 'SUCCESS' } +81ms
  zigbee-clusters:cluster ep: 1, cl: levelControl (8) read attributes [0] +1s
  zigbee-clusters:cluster ep: 1, cl: levelControl (8) send frame ZCLStandardHeader {
  frameControl: [],
  data: levelControl.readAttributes { attributes: [0] },
  cmdId: 0,
  trxSequenceNumber: 41
} +0ms
  zigbee-clusters:cluster ep: 1, cl: levelControl (8) received frame readAttributesStructured.response levelControl.readAttributesStructured.response {
  attributes: <Buffer 00 00 00 20 24>
} +91ms
  zigbee-clusters:cluster ep: 1, cl: levelControl (8) read attributes result { attributes: <Buffer 00 00 00 20 24> } +2ms
2025-08-15T08:36:31.563Z [log] [ManagerDrivers] [Driver:rgb_led_strip_controller] [Device:174731e7-fbc9-4428-8498-d8b99a49decb] changeOnOff() → false
  zigbee-clusters:cluster ep: 1, cl: onOff (6) send frame ZCLStandardHeader {
  frameControl: ['clusterSpecific'],
  data: <Buffer >,
  cmdId: 0,
  trxSequenceNumber: 61
} +3s

```

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 15, 2025, 8:49am UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/11 "2025-08-15T08:49:46Z")

</div>

Ok, I was able to gather the logs. This is the full flow

1. On / off triggered:

```auto
2025-08-15T08:40:17.108Z [log] [ManagerDrivers] [Driver:rgb_led_strip_controller] [Device:174731e7-fbc9-4428-8498-d8b99a49decb] changeOnOff() → false zigbee-clusters:cluster ep: 1, cl: onOff (6) send frame ZCLStandardHeader { frameControl: ['clusterSpecific'], data: <Buffer >, cmdId: 0, trxSequenceNumber: 67 } +6s zigbee-clusters:cluster ep: 1, cl: onOff (6) received frame defaultResponse onOff.defaultResponse { cmdId: 0, status: 'SUCCESS' } +95ms
2025-08-15T08:40:23.168Z [log] [ManagerDrivers] [Driver:rgb_led_strip_controller] [Device:174731e7-fbc9-4428-8498-d8b99a49decb] changeOnOff() → true zigbee-clusters:cluster ep: 1, cl: onOff (6) send frame ZCLStandardHeader { frameControl: ['clusterSpecific'], data: <Buffer >, cmdId: 1, trxSequenceNumber: 68 } +6s zigbee-clusters:cluster ep: 1, cl: onOff (6) received frame defaultResponse onOff.defaultResponse { cmdId: 1, status: 'SUCCESS' } +90ms zigbee-clusters:cluster ep: 1, cl: levelControl (8) read attributes [0] +1s zigbee-clusters:cluster ep: 1, cl: levelControl (8) send frame ZCLStandardHeader { frameControl: [], data: levelControl.readAttributes { attributes: [0] }, cmdId: 0, trxSequenceNumber: 45 } +0ms zigbee-clusters:cluster ep: 1, cl: levelControl (8) received frame readAttributesStructured.response levelControl.readAttributesStructured.response { attributes: <Buffer 00 00 00 20 24> } +102ms zigbee-clusters:cluster ep: 1, cl: levelControl (8) read attributes result { attributes: <Buffer 00 00 00 20 24> } +1ms

```

**Result: No issues**

1. **Dim triggered - freeze**

```auto
2025-08-15T08:41:18.152Z [log] [ManagerDrivers] [Driver:rgb_led_strip_controller] [Device:174731e7-fbc9-4428-8498-d8b99a49decb] changeDimLevel() → 0.83

  zigbee-clusters:cluster ep: 1, cl: levelControl (8) send frame ZCLStandardHeader {

frameControl: ['clusterSpecific'],

data: levelControl.moveToLevelWithOnOff {

level: 211,

transitionTime: 65535

  },

cmdId: 4,

trxSequenceNumber: 47

} +7s

zigbee-clusters:cluster ep: 1, cl: levelControl (8) received frame defaultResponse levelControl.defaultResponse { cmdId: 4, status: 'SUCCESS' } +78ms

zigbee-clusters:cluster ep: 1, cl: levelControl (8) received frame reportAttributes levelControl.reportAttributes { attributes: <Buffer 00 00 20 d3> } +188ms

```

1. **Off command - no response on Led**

```auto
2025-08-15T08:41:42.974Z [log] [ManagerDrivers] [Driver:rgb_led_strip_controller] [Device:174731e7-fbc9-4428-8498-d8b99a49decb] changeOnOff() → false

  zigbee-clusters:cluster ep: 1, cl: onOff (6) send frame ZCLStandardHeader {

frameControl: ['clusterSpecific'],

data: <Buffer >,

cmdId: 0,

trxSequenceNumber: 71

} +7s

zigbee-clusters:cluster ep: 1, cl: onOff (6) received frame defaultResponse onOff.defaultResponse { cmdId: 0, status: 'SUCCESS' } +104ms

zigbee-clusters:cluster ep: 1, cl: onOff (6) received frame reportAttributes onOff.reportAttributes { attributes: <Buffer 00 00 10 00> } +363ms

```

Interesingly, it reports success in logs..

---

<div class="post-metadata">

**Author:** ![Karol\_Ha](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/karol_ha/32/123364_2.png) [@Karol\_Ha](https://community.homey.app/u/Karol_Ha)\
**Post date:** [August 15, 2025, 10:13am UTC](https://community.homey.app/t/help-with-homey-oxt-rgbcct-zigbee-controller-ts0502b-basic-controls-not-working/141487/12 "2025-08-15T10:13:13Z")

</div>

SUCCESS!

I’ve written my own ZigbeeLightDevice, and everything works ok! What I did is get all the endpoints and apply the changes to all. Surprisingly, it works. I have 1 color led strip so its sufficient for my needs. Here is the code:

```auto
'use strict';

const { ZigBeeLightDevice } = require('homey-zigbeedriver');

class rgb_led_strip_controller extends ZigBeeLightDevice {
  async onNodeInit() {
    this._levelEpIds = Object
      .entries(this.zclNode.endpoints || {})
      .filter(([, ep]) => ep?.clusters?.levelControl)
      .map(([id]) => Number(id));

    this.registerCapabilityListener('onoff', (value) => this._setOnOffAll(value));
    this.registerCapabilityListener('dim', (v) => this._setLevelAll(Math.round(v * 254), 10));
  }

  async _setOnOffAll(on) {
    // Use Move to Level *with On/Off* (cmd 0x04) to force state + level
    const level = on ? 254 : 0; // 0 = off, >0 = on
    const transitionTime = 0; // tenths of a second; 0 = instant
    await Promise.allSettled(this._levelEpIds.map(async (epId) => {
      await this.zclNode.endpoints[epId].clusters.levelControl.moveToLevelWithOnOff({
        level, transitionTime,
      });
    }));
  }

  async _setLevelAll(level, transitionTime = 0) {
    await Promise.allSettled(this._levelEpIds.map(async (epId) => {
      await this.zclNode.endpoints[epId].clusters.levelControl.moveToLevelWithOnOff({
        level, transitionTime,
      });
    }));
  }
}

module.exports = rgb_led_strip_controller;

```