# Heimdall support for Fibaro Smart Implant Input Alarms **URL:** \ **Category:** Questions & Help\ **Tags:** app, z-wave\ **Created:** [July 14, 2020, 4:57am UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366 "2020-07-14T04:57:56Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [July 14, 2020, 4:57am UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366/1 "2020-07-14T04:57:56Z")
I use the Fibaro Smart Implant to open my gates and garage door. Connected to the Input of each device is a magnetic reed switch which sets an alarm when the gates or garage door is opened. Is there any way to have these alarms monitored by #heimdall ? When creating flows you can see input 1 and input 2 on the device and take action when these inputs are either opened or closed. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [July 14, 2020, 4:36pm UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366/2 "2020-07-14T16:36:07Z")
Hi @Peter_Bittner, Should be possible when you link it to a Virtual Device, please see the [FAQ](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/2) ---
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [July 15, 2020, 5:14am UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366/3 "2020-07-15T05:14:10Z")
Thanks. Have read the material and gave it a go. The device is visible to Heimdall but I can’t seem to set it’s value. I have set up the virtual device as a sensor/contact alarm. ![IMG_2179](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/4/f48d91c897a0fc7657d59b0ad1efacc79ca4f5ec.jpeg) I then set up a flow as per below. Where have I gone wrong? ![Screen Shot 2020-07-15 at 3.08.53 pm](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/7/d74241e1e50f78a78fc8700efd49bf32dfd15950.png) ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [July 15, 2020, 6:19am UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366/4 "2020-07-15T06:19:09Z")
Please follow [the instructions](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/8) to the letter. You need to set the capability (_alarm\_contact_ or _alarm\_motion_) to _false_ or _true_. ---
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [July 15, 2020, 7:44am UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366/5 "2020-07-15T07:44:18Z")
Ok, thanks for continuing to help. I have re read the instructions but when I create the VD I don’t see how to set a capability. I cannot see a tag called “alarm\_motion”. I only see a tag called “Motion alarm” in red. Peter > ![](https://sea1.discourse-cdn.com/flex015/user_avatar/community.athom.com/daneedekruyff/45/964_2.png "DaneedeKruyff") | [DaneedeKruyff](https://community.homey.app/u/daneedekruyff) > July 15 | > > - | - | Please follow [the instructions](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/8) to the letter. You need to set the capability (_alarm\_contact_ or _alarm\_motion_) to _false_ or _true_. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [July 15, 2020, 11:43am UTC](https://community.homey.app/t/heimdall-support-for-fibaro-smart-implant-input-alarms/32366/6 "2020-07-15T11:43:01Z")
> [@Heimdall - Let Homey watch over your home](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/8): > > To do that you need to use the **Set a virtual sensor value** flow card form the **Virtual Device** and use it like this: > > ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/b/3babc44f7baee5ca8394fd78b2cb93613f0703be.png) > (enable motion) > > ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/b/7b7faf353191b44aef8a7a5e87deecce92e16125.png) > (disable motion) You have to set the _alarm\_contact_ (or _alarm\_motion_) to either _false_ or _true_ in a flow. All relevant screenshots are in the previously mentioned post.