# Heimdall - Let Homey watch over your home **URL:** \ **Category:** Apps\ **Tags:** app, official, security, homey-pro:mini:shs, heimdall\ **Created:** [August 22, 2018, 1:41pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134 "2018-08-22T13:41:20Z")\ **Posts on this page:** 20\ **Page:** 89
**Author:** ![Simone\_Erle](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/simone_erle/32/113757_2.png) [@Simone\_Erle](https://community.homey.app/u/Simone_Erle)\ **Post date:** [January 30, 2026, 3:08pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1788 "2026-01-30T15:08:12Z")
ok. thanks. I set it ---
**Author:** ![Luca\_Tucci](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/luca_tucci/32/31684_2.png) [@Luca\_Tucci](https://community.homey.app/u/Luca_Tucci)\ **Post date:** [February 13, 2026, 3:09pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1789 "2026-02-13T15:09:08Z")
Hi, I have a Frient Intelligent Keypad and i have registered my RFID tag, but I have a question: can I use a silent code also with RFID Tag or only with PIN mode? If is possibile how can I do it? Regards. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [February 13, 2026, 4:11pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1790 "2026-02-13T16:11:04Z")
Hi Luca, That’s only possible for manually entered codes. ---
**Author:** ![Abdul\_786](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/abdul_786/32/79236_2.png) [@Abdul\_786](https://community.homey.app/u/Abdul_786)\ **Post date:** [February 25, 2026, 9:22am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1791 "2026-02-25T09:22:19Z")
Hey Can someone show me their flow with the keypad? I do not understand how to make the flow ---
**Author:** ![Abdul\_786](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/abdul_786/32/79236_2.png) [@Abdul\_786](https://community.homey.app/u/Abdul_786)\ **Post date:** [February 25, 2026, 9:32pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1792 "2026-02-25T21:32:09Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/4/b4f5656964da1055099403ca8f81b28b089d3895.png) What should i have on the keypad? The keypad is in the entre area in the house ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [February 25, 2026, 9:43pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1793 "2026-02-25T21:43:07Z")
Please explain what you’re trying to do or want to happen. Posting a partial screenshot doesn’t make much sense. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [February 26, 2026, 7:06pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1795 "2026-02-26T19:06:24Z")
There’s no need to setup flows when using the Frient keypad, please see the changelog to find the instructions on how to configure the use of a Frient keypad with RFID codes. Also, please don’t send unsolicited PM’s for support. ---
**Author:** ![carlo69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/carlo69/32/22314_2.png) [@carlo69](https://community.homey.app/u/carlo69)\ **Post date:** [March 12, 2026, 1:12pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1796 "2026-03-12T13:12:09Z")
Hi. Could you confirm that Third Reality Garage Door Tilt Sensor isn’t compatible with Heimdall? I can install it in Homey and make flows, but I can’t see that device in the list of Heimdall’s devices where I can manage state and setup. Thanks Regards Carlo ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [March 12, 2026, 4:59pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1797 "2026-03-12T16:59:32Z")
I can’t. Please confirm with developer of the app for the device if it supports the required capabilities. These can be found in the opening post of this topic. ---
**Author:** ![Oyvind\_Lilleberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oyvind_lilleberg/32/140892_2.png) [@Oyvind\_Lilleberg](https://community.homey.app/u/Oyvind_Lilleberg)\ **Post date:** [March 17, 2026, 1:37pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1798 "2026-03-17T13:37:31Z")
I’m having some issues with false alarms when someone is coming home and the alarm is activated. I have a Yale Doorman in the door, and the flow is built like this. The WHEN card says that when the Yale Doorman is unlocked, THEN set surveillance mode to disconnected. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/4/24ff841411ab653aec91210d1f91e27b052ec896.png) I have also put in a 30 seconds delay for alarms in the Heimdall settings: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/0/506cd7d2d97070c10996950a29444dc5c623c033.png) Still the alarm is set off. What am I doing wrong? ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [March 17, 2026, 5:02pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1799 "2026-03-17T17:02:36Z")
Have you checked if the Surveillance Mode is actually set to disarmed. Did you check the Heimdall log to see what device triggered the alarm, also, you should see a sequence there, make sure it’s not a timing issue (your lock triggering the flow to slow) ---
**Author:** ![Oyvind\_Lilleberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oyvind_lilleberg/32/140892_2.png) [@Oyvind\_Lilleberg](https://community.homey.app/u/Oyvind_Lilleberg)\ **Post date:** [March 17, 2026, 8:28pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1800 "2026-03-17T20:28:46Z")
I have a Aqara door sensor on the same door and it looks like its that sensor triggering the alarm. According to the Heimdal log the alarm was triggere at 14:28:49, and at 14:29:02 the surveillance mode was set to disarmed by flowcard. Si there is 13 seconds from the trigger to the disarming. Shouldn’t the 30 seconds delay be enough for not sounding the alarm? Edit: I think I found the problem. I had not set the sensor triggering the alarm to delayed. I had it before but a couple of weeks ago I had to remove and add the sensor, thus making that setting disappear. Didn’t remember to turn it on again. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [March 17, 2026, 8:44pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1801 "2026-03-17T20:44:01Z")
Good te see you found the reason and report back! ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [May 27, 2026, 7:39pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1802 "2026-05-27T19:39:52Z")
New test version published > # Test version 2.10.22 > > - Change in retrieving zone names Made some improvement on retrieving zone names, the old code could cause timeouts, most likely to occur on older Homeys. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [June 8, 2026, 6:37pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1803 "2026-06-08T18:37:07Z")
New version published > # Version 2.10.23 > > - Change in retrieving zone names Made some improvement on retrieving zone names, the old code could cause timeouts, most likely to occur on older Homeys. This update brings the changes in 2.10.22 to the production version ---
**Author:** ![ChrisWat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chriswat/32/122021_2.png) [@ChrisWat](https://community.homey.app/u/ChrisWat)\ **Post date:** [June 10, 2026, 9:36am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1804 "2026-06-10T09:36:26Z")
Hi everyone, I need your help. Since “Sensor active during check” lists all open sensors individually, I’m having a small timing issue with updating the OpenSensoCount and OpenSensorName variables. How could I implement this more effectively? The “OpenSensorName” variable should end with: Kitchen window is open, bathroom window is open, bedroom window is open. In the OpenSensorCount variable, “3” I would then use this information in further timeline outputs or in push notifications. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/d/7d8df9a6b283ced591ed2e5343af030426a9da1d.png) Sometimes the OpenSensorName variable contains only one or two values, even though it should contain all three of the open window sensors, and the variables are reset before every startup. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/0/a041d7271e10c1225b9537f106be83ccade94dad.png) ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [June 19, 2026, 7:46am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1805 "2026-06-19T07:46:45Z")
New test version published > # Test version 2.11.0 > > - Updated homey-api to 3.19.1 No changes in functionality, updated the homey-api to the latest version ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [June 25, 2026, 6:57pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1806 "2026-06-25T18:57:45Z")
Test vestion 2.11.0 promoted to live version > # Version 2.11.0 > > - Updated homey-api to 3.19.1 No changes in functionality, updated the homey-api to the latest version ---
**Author:** ![MRK](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MRK](https://community.homey.app/u/MRK)\ **Post date:** [August 18, 2026, 7:45pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1807 "2026-08-18T19:45:26Z")
Hi, I have two Aeotec door window sensors 7. But they didn’t work in Heimdall. I see the status change in de device itself, but nothing in the Heimdall log and also no alarm activation. Only the status “sensor last seen” has reported in Heimdall. Very strange. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [August 18, 2026, 8:09pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/1808 "2026-08-18T20:09:26Z")
Are the devices shown in the Devices state and settings pages in Heimdall, if so, what capabilities do they show? [Previous page](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134.md?page=88) [Next page](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134.md?page=90)