# Heimdall - Let Homey watch over your home **URL:** \ **Category:** Apps\ **Tags:** app, official, security, homey-pro:mini:shs, heimdall\ **Created:** [August 22, 2018, 1:41pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134 "2018-08-22T13:41:20Z")\ **Posts on this page:** 20\ **Page:** 33
**Author:** ![rindler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rindler/32/5501_2.png) [@rindler](https://community.homey.app/u/rindler)\ **Post date:** [November 20, 2019, 7:15pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/649 "2019-11-20T19:15:45Z")
Now I feel stupid. Maybe it’s been like this all the time. Obviously the devices which are logged are the ones that have the setting “log”. They are not active in Armed or partially armed. I thought when I have selected to just log when the surveillance mode is active that those sensors would write to Heimdall dashboard, and not cause the alarm, but when the surveillance mode is disarmed that they wouldn’t be logged… ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [November 20, 2019, 7:19pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/650 "2019-11-20T19:19:38Z")
Great support @DaneedeKruyff! Thanks. Keep up the good work! ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [November 20, 2019, 8:07pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/651 "2019-11-20T20:07:10Z")
@rindler Devices that have the setting **Log** will always log regardless of the _Only when a Surveillance Mode is active_ setting(\*). This setting is meant to prevent logging from devices with the **Partial** and **Full** setting when no **Surveillance Mode** is active. (\*) With the flow cards introduced in version [2.0.22](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/621) and [2.0.23](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/629) you can dynamically set the **Log** setting based on the **Surveillance Mode** like this: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/f/5f246c77f97556024f145f36f3f834bd7339274a.jpeg) @Henk_Renting Thanks! ---
**Author:** ![rindler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rindler/32/5501_2.png) [@rindler](https://community.homey.app/u/rindler)\ **Post date:** [November 20, 2019, 8:33pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/652 "2019-11-20T20:33:44Z")
Thanks for your help and explanation! ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [November 27, 2019, 3:35pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/653 "2019-11-27T15:35:41Z")
Hello Danee, I’m searching for a possibility to check the online state of my ABUS smoke sensors - to see if they are still connected to Homey or the zwave mesh. I can’t see the time last seen in the development view (Z-Wave) or in the device itself. So I hoped to see the state in your app. Perhaps this would be a reason to add smoke sensors? -\> see the state like time last seen, only in the devices/state page, not in the settings page (for alerts). I confirm, alers should be independent of arming with Heimdall. -\> check the last seen time with timeline comment like it is possible for motion sensors in the settings page. So far my ideas…but perhaps you have another idea or app I haven’t ween yet where I can check the sensor state? Thank you Ronny ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [December 2, 2019, 7:38pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/654 "2019-12-02T19:38:32Z")
Hi @RonnyW You can see the last update from your sensors on the [devices](https://developer.athom.com/tools/devices) developer page where it is shown like this: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/a/eacdb35f0dc51d8abf3472285dddfb9712b6f59c.png) I have no plans to add this to _ **Heimdall** _ ---
**Author:** ![Gennady](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gennady/32/18451_2.png) [@Gennady](https://community.homey.app/u/Gennady)\ **Post date:** [December 2, 2019, 10:43pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/655 "2019-12-02T22:43:45Z")
Hello Danee. Have one question/problem: (Surveillance mode - SM) When I change SM in the Homey to Armed then SM in the Homekit also changed for Armed - Everything fine and correct. But when I change Homey SM to the Disarmed, then SM in the Homekit changed to disable, and if I change Homey SM to Partially Armed, then SM in the Homekit changed to Home. Ill use. Heimdall - ver 2.0,35 and HomeKit Sprut 3.1.0 Maybe you have any solution, or maybe im do something wrong? Thank for your assistance and your time. ---
**Author:** ![Hannes85](https://avatars.discourse-cdn.com/v4/letter/h/e79b87/32.png) [@Hannes85](https://community.homey.app/u/Hannes85)\ **Post date:** [December 3, 2019, 10:35am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/656 "2019-12-03T10:35:29Z")
This is exactly what one expects. SM disarmed is OFF. partially armed is Home in HomeKit because the alarm is enabled but only for certain zones because you are still at home and do not want to trigger the alarm when walking around in certain zones (bedroom, bathroom for example). ---
**Author:** ![Gennady](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gennady/32/18451_2.png) [@Gennady](https://community.homey.app/u/Gennady)\ **Post date:** [December 3, 2019, 10:40am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/657 "2019-12-03T10:40:45Z")
Yes, I can understand this, but the question is whether it is possible to configure Homey and HomeKit to coincide. ---
**Author:** ![2Be](https://avatars.discourse-cdn.com/v4/letter/2/2bfe46/32.png) [@2Be](https://community.homey.app/u/2Be)\ **Post date:** [December 3, 2019, 10:51am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/658 "2019-12-03T10:51:10Z")
It does coincide, the used terms are just different. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [December 3, 2019, 4:37pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/659 "2019-12-03T16:37:40Z")
Hello @Gennady Welcome to the community, thanks for using _ **Heimdall** _. Homey and Homekit both use their own names describing the **Surveillance Modes** as explained above, I have no influence on the actual names. If your concern is the mapping between the different modes (last time I looked Homekit used 4 modes and Homey 3) you will have to contact the developer of the Homekit app. ---
**Author:** ![KennethJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kennethj/32/19919_2.png) [@KennethJ](https://community.homey.app/u/KennethJ)\ **Post date:** [December 8, 2019, 4:32pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/660 "2019-12-08T16:32:04Z")
Hi guys Have been using Heimdall for some days to play around with but now I’m ready to give it the well-known Wife-Test and implement it in our daily routine. But now suddenly nothing happens when clicking the ‘Surveillance’ device on my app. I don’t think I have changed anything in my config though. Is this something I have caused - any ideas of how to solve it? -Kenneth ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [December 8, 2019, 6:59pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/661 "2019-12-08T18:59:52Z")
> [@KennethJ](#): > > But now suddenly nothing happens when clicking the ‘Surveillance’ device on my app. A simple click just deactivates the alarm. Make a long click and change the mode in the device mode view. ---
**Author:** ![KennethJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kennethj/32/19919_2.png) [@KennethJ](https://community.homey.app/u/KennethJ)\ **Post date:** [December 8, 2019, 7:47pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/662 "2019-12-08T19:47:07Z")
I feel like a jerk now. Haha. Simply forgot to press-and-hold. Thanks, Ronny. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [December 17, 2019, 11:32am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/663 "2019-12-17T11:32:26Z")
Hi all, is anyone facing with 2.0.36 recently on 3.2.1-RC2 issue with Heimdall frozing whole Homey app on Android 9 (debug sent to Ahtom) while being on Devices section and not recognizing live sensor updates until Heimdall restart etc? If that would help - App debug : 22c182a8-e73b-4e82-976f-2fb89dce77ff Btw it’s taking more then 30MB memory according to the Developers Insights (33.7 MB / 35 MB etc.) Last week data (I’m rebooting Homey weekly) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/1/916f34729ebec403010b87b82d7ec0b5c0012b0d.png) ---
**Author:** ![Jan\_Willem\_Visser](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_willem_visser/32/10747_2.png) [@Jan\_Willem\_Visser](https://community.homey.app/u/Jan_Willem_Visser)\ **Post date:** [December 20, 2019, 12:22am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/664 "2019-12-20T00:22:26Z")
I got the same problem. When i open the heimdall app and i’m on the tap “dashboard” ther is no problem. But when i touch one of the other tab’s (Devices, settings or instructions) the app get frozen. I have to close the intire homey app and restart again. ---
**Author:** ![rindler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rindler/32/5501_2.png) [@rindler](https://community.homey.app/u/rindler)\ **Post date:** [December 21, 2019, 6:55pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/665 "2019-12-21T18:55:20Z")
Usually when I suggest something you have already thought of that functionality, I just don’t understand how to do it. Anyway, I am trying again. Hehe. I have a group of sensors which I activate logging to with those new flow cards when the surveillance mode is armed. Now I would like to send a notification to the timeline when a sensor which is logged got “tripped”. Does this functionality already exist? For example I would like to get notifications when the sensors in the garage become activated, but not trigger the alarm, when the surveillance mode is armed. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [December 21, 2019, 7:40pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/666 "2019-12-21T19:40:34Z")
@Sharkys, @Jan_Willem_Visser I’m afraid that’s something in the Homey App which is outside my control. I’ve never experienced this or seen it mentioned before. The settings pages haven’t been changed for very long. @rindler Hehe, I think this should do it: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/b/3b9ebb395df3cba2bb7f42c48bbb162892244f9e.jpeg) ---
**Author:** ![rindler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rindler/32/5501_2.png) [@rindler](https://community.homey.app/u/rindler)\ **Post date:** [December 21, 2019, 8:02pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/667 "2019-12-21T20:02:50Z")
Hehe. I thought of that flow, but thought it would be triggered by all other Heimdall loglines as well. Will try and see how it works. If it works it would be nice with the local tags ‘zone’ and ‘name’. But will report back if it does what I want. ---
**Author:** ![Kevin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kevin/32/7999_2.png) [@Kevin](https://community.homey.app/u/Kevin)\ **Post date:** [December 21, 2019, 8:21pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/668 "2019-12-21T20:21:21Z")
This should prevent unnecessary msgs in your timeline. And Logic: local heimdall device tag contains garage(something common used for all garage sensors) And Heimdall: status is not disarmed [Previous page](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134.md?page=32) [Next page](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134.md?page=34)