# Heimdall - Let Homey watch over your home **URL:** \ **Category:** Apps\ **Tags:** app, official, security, homey-pro:mini:shs, heimdall\ **Created:** [August 22, 2018, 1:41pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134 "2018-08-22T13:41:20Z")\ **Posts on this page:** 20\ **Page:** 28
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [August 1, 2019, 10:43am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/549 "2019-08-01T10:43:18Z")
So u don’t have this card in the AND ? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/4/473b5e03ef98989405f79de59a3507c8955bb56f.jpeg) ---
**Author:** ![Borgs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/borgs/32/12491_2.png) [@Borgs](https://community.homey.app/u/Borgs)\ **Post date:** [August 1, 2019, 11:31am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/550 "2019-08-01T11:31:51Z")
Yes I do… Was looking for a ”Ask for confirmation” not ”Send a push confirmation” ---
**Author:** ![kentok](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kentok/32/11765_2.png) [@kentok](https://community.homey.app/u/kentok)\ **Post date:** [August 16, 2019, 7:38pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/551 "2019-08-16T19:38:01Z")
I am using Heimdall, and I am very happy with the app! I would like to setup a Woopla IFTTT phone call to my phone in when the alarm is activated. Then I will make sure that I will wake up at night if the alarm is activated. I am not very familiar with IFTTT. Anyone who knows how I can configure this step by step? It exists a solution if you have a Nest smoke detector: > **[Receive a woopla emergency call if Nest detects smoke](https://ifttt.com/applets/avscj8y3-receive-a-woopla-emergency-call-if-nest-detects-smoke)** > > If your Nest Protect detects smoke you will receive an automated phone call via woopla phone service to inform you. What I am looking for, is the same functionality if my Heimdall alarm is activated. As an alternative, it would have been great if the Homey app itself could have played an ongoing alarm sound that did not stop until it was cancelled. However, I guess this is something the Athom team need to look into… ---
**Author:** ![ArnoP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnop/32/13709_2.png) [@ArnoP](https://community.homey.app/u/ArnoP)\ **Post date:** [August 16, 2019, 10:28pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/552 "2019-08-16T22:28:31Z")
> [@kentok](#): > > it would have been great if the Homey app itself could have played an ongoing alarm sound that did not stop until it was cancelled You can use the [Soundboard app](https://apps.athom.com/app/com.athom.soundboard) to play a sound by a flow and repeat the flow (let the flow start itself as last card) as long as necessary. ---
**Author:** ![kentok](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kentok/32/11765_2.png) [@kentok](https://community.homey.app/u/kentok)\ **Post date:** [August 16, 2019, 10:33pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/553 "2019-08-16T22:33:21Z")
Sorry for not being specific, but I meant an ongoing alarm on my iPhone. ---
**Author:** ![ArnoP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnop/32/13709_2.png) [@ArnoP](https://community.homey.app/u/ArnoP)\ **Post date:** [August 16, 2019, 10:41pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/554 "2019-08-16T22:41:54Z")
Misschien kun je wat met [deze app](https://community.homey.app/t/pushover-notifications/15645/17). ---
**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\ **Post date:** [August 25, 2019, 9:15am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/555 "2019-08-25T09:15:04Z")
Hoping someone could help me out with a flow. Using this current flow which works great. I’m just wondering if it would be possible to add in if the alarm is activated during nighttime or certain hours then turn on all lights? Thanks , ![Screenshot_20190825-171235_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/c/ceda56e208890743c7ed723f209ea1eb7d764943.jpeg) ![Screenshot_20190825-171249_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/d/d894875aa595effcc4012fea510808ce04c4d52c.jpeg) ---
**Author:** ![0burner0](https://avatars.discourse-cdn.com/v4/letter/0/90ced4/32.png) [@0burner0](https://community.homey.app/u/0burner0)\ **Post date:** [August 25, 2019, 9:35am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/556 "2019-08-25T09:35:04Z")
User the AND function. So WHEN Alarm activated AND its Night time THEN do… ELSE do…(current flow) ---
**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\ **Post date:** [August 25, 2019, 9:43am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/557 "2019-08-25T09:43:39Z")
Thanks for the reply, didn’t really make it clear but I ment if it’s night time use the same THEN but add turn on lights. But if it’s activated during the day just use the original THEN flow. Or would I need a separate flow? ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [August 25, 2019, 9:52am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/558 "2019-08-25T09:52:21Z")
Like 0burner0 mentioned: Make an extra card in the middle AND colom. Pick the time card and take “It is daytime”. Hit the invert slider and u get “it is night time” In the THEN colom u select the same cards as in ur screenshot and make the same cards again in the same colom. Click them, hold them untill they become greyed and the drag them down. U will create the ELSE colom with this. Add the lamp to the THEN colom and ur done. ---
**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\ **Post date:** [August 25, 2019, 10:06am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/559 "2019-08-25T10:06:07Z")
Thanks to you both. I knew I could add the AND but not familiar with invert and didn’t even know an ELSE column was available. So much to learn. Thanks again. ---
**Author:** ![Tomm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tomm/32/10625_2.png) [@Tomm](https://community.homey.app/u/Tomm)\ **Post date:** [September 2, 2019, 8:35am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/560 "2019-09-02T08:35:24Z")
When I am away from home and a window is opened, I want the alarm to go off. But when I leave home while the window is already open, I want the alarm not to be triggered. Possible? ---
**Author:** ![Borgen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/borgen/32/12762_2.png) [@Borgen](https://community.homey.app/u/Borgen)\ **Post date:** [September 2, 2019, 9:58am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/561 "2019-09-02T09:58:09Z")
Yes this is possible, but you will have to create several flows to mange it. I do the following: When setting the house to “armed” I have a ‘armed delay’ set to 15sec, during this time have other flows that initiates checks of all sensors and if a sensor is activated/open then the house is set to Disarmed again and a push message is sent saying “XXX in YYY is open, please close and try to arm again”. - First flow react when the ‘Arming delay’ is initiated and ‘then’ action is to check all sensors. - Second flow reacts if a sensor is active during check of all sensors and puts the house in disarmed and sends push messages ---
**Author:** ![Tomm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tomm/32/10625_2.png) [@Tomm](https://community.homey.app/u/Tomm)\ **Post date:** [September 2, 2019, 10:09am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/562 "2019-09-02T10:09:07Z")
Hmm, a start but not really what I’m looking for. My system is armed, based on geolocation so I’m already 200m from home when i get the reminder to close my windows. And when I talk windows I talk about small tipping windows above the door that do not necessarily have to be closed when you quickly run an errand. ---
**Author:** ![Borgen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/borgen/32/12762_2.png) [@Borgen](https://community.homey.app/u/Borgen)\ **Post date:** [September 2, 2019, 10:43am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/563 "2019-09-02T10:43:32Z")
Ok, read your post again and now understand what you want. You want the house always armed when away but if a sensor is breached already when arming the house you want it to be ignored. Could possibly also be solved but will be more complex. Perhaps do a check like I do and if windows X is opened set a variable to Yes and then in the Alarm Flow you have add an “and” parameter that this value has to be set to “No” for the alarm actions to take place. Haven’t tested and could be other things that makes this not working properly , you might get a bunch of logg messages from Heimdall that the alarm has been breached. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [September 2, 2019, 11:35am UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/564 "2019-09-02T11:35:43Z")
@Tomm have you actually tested that situation because it should work like you desire. The **Alarm State** will be triggered when a sensor’s state changes while a **Surveillance Mode** is active, not when a sensor is already ‘active’ (in this case opened) when the **Surveillance Mode** is set. So, when the window is open when _ **Heimdall** _ is armed the **Alarm State** will not be activated, you may be warned a windows is open, but that’s configurable. Only until that windows is closed and opened again the **Alarm State** will be activated. ---
**Author:** ![Tomm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tomm/32/10625_2.png) [@Tomm](https://community.homey.app/u/Tomm)\ **Post date:** [September 2, 2019, 12:20pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/565 "2019-09-02T12:20:04Z")
When I check my log I see that it actually happened. Surveillance mode activated at 10:17:53 and alarm is activated at 10:18:21. When i simulate i leave the house nothing happens. Any thoughts why this could have happend once? | 02-09-2019 | 10:18:51.696 | Ingeschakeld | Heimdall | Alarm is geactiveerd. Klepraam Voorzijde: Geopend | | --- | --- | --- | --- | --- | | 02-09-2019 | 10:18:51.550 | Ingeschakeld | Heimdall | Alarm is geactiveerd. Klepraam Voorzijde: Geopend | | 02-09-2019 | 10:18:22.547 | Ingeschakeld | Heimdall | Alarm activatie is uitgesteld: 20 seconden. | | 02-09-2019 | 10:18:22.547 | Ingeschakeld | Heimdall | Klepraam Voorzijde in Woonkamer activeerde Alarm. | | 02-09-2019 | 10:18:21.898 | Ingeschakeld | Heimdall | Alarm activatie is uitgesteld: 20 seconden. | | 02-09-2019 | 10:18:21.898 | Ingeschakeld | Heimdall | Klepraam Voorzijde in Woonkamer activeerde Alarm. | | 02-09-2019 | 10:18:05.725 | Uitgeschakeld | Apparaat check | Aqara Wireless switch is gereed | | 02-09-2019 | 10:18:05.493 | Uitgeschakeld | Apparaat check | Aqara Vibration Sensor is gereed | | 02-09-2019 | 10:18:05.284 | Uitgeschakeld | Apparaat check | Koelkast is gereed | | 02-09-2019 | 10:18:04.912 | Uitgeschakeld | Apparaat check | Raam Slaapkamer is gereed | | 02-09-2019 | 10:18:04.821 | Uitgeschakeld | Apparaat check | Klepraam Voorzijde is gereed | | 02-09-2019 | 10:18:04.737 | Uitgeschakeld | Apparaat check | Over is gereed | | 02-09-2019 | 10:18:04.653 | Uitgeschakeld | Apparaat check | Badkamerlamp is gereed | | 02-09-2019 | 10:18:04.278 | Uitgeschakeld | Apparaat check | MultiSensor is gereed | | 02-09-2019 | 10:18:03.680 | Uitgeschakeld | Apparaat check | Rookmelder is gereed | | 02-09-2019 | 10:18:03.402 | Uitgeschakeld | Apparaat check | Rookmelder is gereed | | 02-09-2019 | 10:18:03.258 | Uitgeschakeld | Apparaat check | Lamp naast de bank is gereed | | 02-09-2019 | 10:18:03.104 | Uitgeschakeld | Apparaat check | Lamp in de hal is gereed | | 02-09-2019 | 10:18:02.964 | Uitgeschakeld | Apparaat check | Lamp op de overloop is gereed | | 02-09-2019 | 10:17:53.321 | Uitgeschakeld | Flowkaart | Toezicht mode wordt ingeschakeld over 0 seconden. | | 02-09-2019 | 10:17:53.614 | Ingeschakeld | Flowkaart | Toezicht mode is ingeschakeld | ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [September 2, 2019, 12:42pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/566 "2019-09-02T12:42:59Z")
> [@Tomm](#): > > |02-09-2019|10:18:21.898|Ingeschakeld|Heimdall|Klepraam Voorzijde in Woonkamer activeerde Alarm.| The code that writes that logline is part of the function that get’s triggered by a state change of a sensor. So my conclusion is that the sensor send a report the state changed. As far as I know sensors will only send a report when their state changes, not on a regular interval announce their state to the controller. ---
**Author:** ![Tomm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tomm/32/10625_2.png) [@Tomm](https://community.homey.app/u/Tomm)\ **Post date:** [September 2, 2019, 10:20pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/567 "2019-09-02T22:20:24Z")
And since i can’t reproduce the problem I am gonna thank you both (@DaneedeKruyff and @Borgen) for your help and let’s hope it was a one time error. ---
**Author:** ![Dave\_Meijer1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave_meijer1/32/12661_2.png) [@Dave\_Meijer1](https://community.homey.app/u/Dave_Meijer1)\ **Post date:** [September 26, 2019, 8:52pm UTC](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134/568 "2019-09-26T20:52:06Z")
Hi All, I want to make a pre alarm check. but I think its not workin. I followed this link [Wat is mis met deze flow in heimdall](https://community.homey.app/t/wat-is-mis-met-deze-flow-in-heimdall/11237) What do I miss here. Thanks, ![03](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/b/bfd2eef79e90e2a64bb056cfb84f1d18124528b1.jpeg) [Previous page](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134.md?page=27) [Next page](https://community.homey.app/t/heimdall-let-homey-watch-over-your-home/134.md?page=29)