# Heiman smoke detector **URL:** \ **Category:** Devices\ **Tags:** z-wave\ **Created:** [October 2, 2018, 4:13am UTC](https://community.homey.app/t/heiman-smoke-detector/2344 "2018-10-02T04:13:52Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![RayCokes](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/raycokes/32/12452_2.png) [@RayCokes](https://community.homey.app/u/RayCokes)\ **Post date:** [September 1, 2019, 7:33pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/43 "2019-09-01T19:33:35Z")
Stil it linked, but it is a button you can turn off and on but does not doe anything, no decent flows to create no tempature to read from. Useless in this state. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [March 22, 2020, 2:52pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/44 "2020-03-22T14:52:43Z")
Did the Z-Wave Heiman smoke- and CO detectors finally get supported in this app? Cannot seem to find it (or I am searching for the wrong app). The Heiman app doesn’t work too well in my case (Homey does not return the sensors to a normal state), and the devoloper in not reachable). So was hoping that this app could help me out… ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [March 23, 2020, 10:01am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/45 "2020-03-23T10:01:15Z")
I have 8 and they work fine. Pressing the button sounds the beeps, triggers a flow and sends a push and they return to normal non alert state directly after that. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [March 23, 2020, 10:03am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/46 "2020-03-23T10:03:32Z")
That sounds promising, @PetervdK! You connected them with the Heiman app? And in what way? Directly from within the Heiman app of by a general Z-Wave device? (While the Heiman app is installed?) ---
**Author:** ![Mecallie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mecallie/32/12444_2.png) [@Mecallie](https://community.homey.app/u/Mecallie)\ **Post date:** [March 23, 2020, 10:17am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/47 "2020-03-23T10:17:27Z")
I have 3 of them. Sometimes they do not return to a “not alarm” state after testing. Simple solution: press the button again and the state reverts to normal. I have to say: I think they are pretty reliable. And it’s great that you can test them with the button instead of real smoke such as the Fibaro’s. Batteries seem to last longer too… ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [March 23, 2020, 11:10am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/48 "2020-03-23T11:10:11Z")
Installed them with the Heiman app. But if you have the app installed, Homey should automatically choose the correct driver from the app, even if you add it by generic z-wave. ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [March 23, 2020, 11:52am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/49 "2020-03-23T11:52:17Z")
> [@Mecallie](#): > > And it’s great that you can test them with the button instead of real smoke such as the Fibaro’s. Testing with the button just tests the battery and the connection with Homey. It doesn’t say anything about the proper working of the smoke detection itself. So be aware that this is a false indication of safety… There is only one way to check if a smoke sensor is working correctly and that is with smoke… ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [March 23, 2020, 9:45pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/50 "2020-03-23T21:45:29Z")
Seems solved now, everything is working fine! Thx all! ---
**Author:** ![BliXem](https://avatars.discourse-cdn.com/v4/letter/b/e47774/32.png) [@BliXem](https://community.homey.app/u/BliXem)\ **Post date:** [March 24, 2020, 11:05am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/51 "2020-03-24T11:05:33Z")
Which app did you use? Can I use the app also for Z-wave? ---
**Author:** ![BliXem](https://avatars.discourse-cdn.com/v4/letter/b/e47774/32.png) [@BliXem](https://community.homey.app/u/BliXem)\ **Post date:** [March 24, 2020, 11:06am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/52 "2020-03-24T11:06:59Z")
I have one Z-wave Heiman smoke detector, but homey says that the smokedetector still is in alarm mode. Don’t know how to reset it. ---
**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\ **Post date:** [March 24, 2020, 11:18am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/53 "2020-03-24T11:18:45Z")
Did you already tried to push the Test-Button. ---
**Author:** ![BliXem](https://avatars.discourse-cdn.com/v4/letter/b/e47774/32.png) [@BliXem](https://community.homey.app/u/BliXem)\ **Post date:** [March 24, 2020, 11:22am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/54 "2020-03-24T11:22:35Z")
Yes. What I did, I tested it with real smoke, alarm goes off and I did tick on the test-button. No it is saying that its off. So looks like it’s working. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [March 24, 2020, 11:24am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/55 "2020-03-24T11:24:43Z")
I added the device as a general Z-Wave device, while the Heiman app was installed. Now the detectors work as should, alarms disappear after a few seconds. Son’t know if this has really helped, or if I was lucky, but still… ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [March 24, 2020, 4:46pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/56 "2020-03-24T16:46:53Z")
Like i said, the Heiman app: [Heiman App voor Homey | Homey](https://homey.app/nl-nl/app/com.heiman/Heiman/) It is for Z-wave (only). ---
**Author:** ![Milko\_Kliemert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/milko_kliemert/32/9859_2.png) [@Milko\_Kliemert](https://community.homey.app/u/Milko_Kliemert)\ **Post date:** [May 6, 2020, 2:02pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/57 "2020-05-06T14:02:44Z")
Is the zigbee version now available ? ---
**Author:** ![Quent\_Mercier](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/quent_mercier/32/25413_2.png) [@Quent\_Mercier](https://community.homey.app/u/Quent_Mercier)\ **Post date:** [May 19, 2020, 6:21am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/58 "2020-05-19T06:21:02Z")
Also waiting for the Zigbee version. Is someone working on it? Thank you in advance, ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [May 19, 2020, 7:00am UTC](https://community.homey.app/t/heiman-smoke-detector/2344/59 "2020-05-19T07:00:54Z")
The smoke sensor can only be added once Homey is supporting the required Zigbee clusters (we assume part of the Zigbee rewrite); no planning available when they will release this update, but some say soon ---
**Author:** ![Quent\_Mercier](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/quent_mercier/32/25413_2.png) [@Quent\_Mercier](https://community.homey.app/u/Quent_Mercier)\ **Post date:** [May 30, 2020, 9:07pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/60 "2020-05-30T21:07:44Z")
Ok thank you very much for your answer 🙂 ---
**Author:** ![RayCokes](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/raycokes/32/12452_2.png) [@RayCokes](https://community.homey.app/u/RayCokes)\ **Post date:** [June 28, 2020, 12:52pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/61 "2020-06-28T12:52:36Z")
Does anyone know about update of the zigbee core or zigbee Heiman support? It is taking way to long now 👎😢 ---
**Author:** ![Shredder230](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shredder230/32/12462_2.png) [@Shredder230](https://community.homey.app/u/Shredder230)\ **Post date:** [March 2, 2021, 10:18pm UTC](https://community.homey.app/t/heiman-smoke-detector/2344/62 "2021-03-02T22:18:14Z")
@TedTolboom dont dear to already ask, but is the new update creating a chance that we can connect these smokesensors ?? [Previous page](https://community.homey.app/t/heiman-smoke-detector/2344.md?page=2) [Next page](https://community.homey.app/t/heiman-smoke-detector/2344.md?page=4)