# Heatit Z-wave app (v2.7.1) **URL:** \ **Category:** Apps\ **Tags:** app, z-wave\ **Created:** [August 23, 2018, 6:28am UTC](https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166 "2018-08-23T06:28:34Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [August 23, 2018, 6:28am UTC](https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166/2 "2018-08-23T06:28:56Z")
## Changelog: > 2.7.0 > > - Add support for the Z-Smoke AC Smoke Detector device > 2.6.0 > > - Add support for the Z-TEMP2 Thermostat device > - Update Thermostat device driver library > 2.5.0 > > - Add support for the Z-TRM3 Thermostat device > - Add Meter Reset maintenance action for Z-TRM2fx, Z-Dim and Z-relay > - Update Homey meshdriver to v1.3.23 > v2.4.2 > > - Add support for the Z-Push button 4 device > - Update app for new app store > - Update Homey meshdriver to v1.3.21 > 2.4.1 (BETA), Homey SW ≥2.4.0 > > - Finalize app and drivers for ‘Energy’ (Homey 3.0.0) > - Update Homey meshdriver to v1.3.14 > v2.4.0 (BETA), Homey SW ≥2.4.0 > > - Add support for Heatit Z-Dim rotary dimmer > - Update Homey meshdriver to v1.3.9 > v2.3.0 (BETA), Homey SW ≥2.4.0 > > - Fix S2 security handshake issues with Z-TRM2fx, Z-water and Z-Relay that result in Z-wave network stability issues by forcing non-secure inclusion. > - All users experiencing stability issues with the Z-TRM2fx, Z-Water and Z-Relay devices are advised to upgrade to v2.3.0 and remove and re-include their devices based on the v2.3.0 version > > - Removed Homey 1.x.x mobile interface (obsolete) > - Add insights logging for the Thermostat state capability > - Prepared app and drivers for ‘Energy’ (Homey 3.0.0) > - Update Homey meshdriver to v1.3.6 > v2.2.1 > > - Fix issue not being able to include the Heatit Z-push button 2 and Z-push button 8 devices > - Z-TRM2(fx) changed default temperature- and meter-reporting interval from 60 to 900 seconds to prevent Z-wave network lock-up > v2.2.0 > > - Add support for the Heatit Z-relay device > - Add support for the Heatit Z-DIN-616 device > - Update branding of the app > v2.1.2 (BETA) > > - Fix temperature reporting issues for Z-wave thermostat (FW 1.92), Z-TRM2(fx) and Z-Water > _ **Note:** _ This fix only works as of Homey SW 2.0.5 (_[Z-Wave] Reports from nodes with unknown Command Classes can now be read_) and will not be implemented in Homey SW 1.5.x > _ **Note** _ : Please follow the steps mentioned below to fix the temperature reporting : > - For already paired devices: > 1. Go to advanced settings, and replace (add if not existing) Homey’s ID `1` with `1.1` in the following association groups used for the temperature reporting: > - Z-wave thermostat (FW 1.92): Group 3, 4 and 5 > - Z-TRM2(fx): Group 2 and 3 > - Z-Water: Group 11, 12, 13 and 14 > > 2. For the thermostats, change in the Device specific settings (Sensor settings group), the ‘Displayed temperature’ to the sensor connected (default: floor sensor) > 3. Save settings > > - Alternative option is to remove and re-include the device based on v2.1.2 of the app and Homey SW version \> 2.0.5 > > - Add temperature changed flow cards for Z-wave thermostat (FW 1.92), Z-TRM2(fx) and Z-Water > - Update to meshdriver v1.2.32 > v2.1.1 (BETA) > > - Add support for the Z-Water regulator > - Update to meshdriver v1.2.30 > - _Note_ : due to an S2 issue within the Homey Z-wave core, the measured temperatures are not reported for the Z-wave thermostat (FW 1.92) and Z-TRM2(fx) thermostats as well as the Z-Water regulator. When this will be resolved, it is likely that the thermostat will need to be re-included > v2.1.0 (BETA) > > - Add support for the Z-wave thermostat (FW 1.92) > - Add support for the Z-TRM2(fx) thermostat > - Add all remaining settings for the thermostats > - Add Power Regulator Mode action card for the Z-wave thermostat (use at own risk) > > **Note:** due to an issue within the Homey Z-wave core, the measured temperatures are not reported for the Z-wave thermostat (FW 1.92) and the Z-TRM2(fx) thermostats. When this will be resolved, it is likely that the thermostat will need to be re-included > v2.0.2 > > - Add support for the Z-Push button 2 and Z-Push button 8 devices > - Minor (cosmetical) modifications to make the app Homey SW v2.0.0 compatible > v2.0.1 > > - Add thermostat onoff state trigger- and condition cards > v2.0.0 > > - SDK2 rewrite of the ThermoFloor / Heatit app > - SDK2 rewrite of the Multireg / Heatit Z-Wave thermostat device driver > - Update to meshdriver v1.2.28 > > **Note:** unfortunately, the set thermostat mode action card will be set to “comfort” mode after this update. The action card will need to be updated manually. --- _[View the full topic](https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166)._