# Heatit Z-wave app (v2.7.1)

**URL:** <https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166>\
**Category:** Apps\
**Tags:** app, z-wave\
**Created:** [August 23, 2018, 6:28am UTC](https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166 "2018-08-23T06:28:34Z")\
**Posts on this page:** 1\
**Showing post:** 179

<div class="post-metadata">

**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\
**Post date:** [September 19, 2019, 8:35am UTC](https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166/179 "2019-09-19T08:35:05Z")

</div>

Version 2.3.0 (BETA) is available in the app store.

Advised approach for the users that want to re-include the Z-TRM2fx based on this update.

- Install v2.3.0 BETA version of the app
- Move Homey to close proximity of the thermostat (Homey does not support inclusion of the network) and wait sufficient time before Homey finished starting up all apps (~ 30 minutes.
  - If multiple thermostats need to be re-included, connect Homey to a powerfull enough powerbank and move it around.

- Remove the thermostat from Homey, by going to ‘device settings’ \> ‘Remove device’ and follow the instructions (mind updated step 5):

> 1. Press the Center (confirm) button for 10 seconds. The display will show OFF.
> 2. Press Right(down) button 5 times till you see Con in the display.
> 3. Now start to remove the device from Homey.
> 4. Start exclusion mode by pressing Center(confirm) button for approximately 2 seconds. The inclusion / exclusion icon will appear in the display.
> 5. Confirmation will show EcL in the display.  
> When Err(error) appears, check if the thermostat has been removed from Homey. If so, reset the thermostat according to the instructions of the manual. Otherwise repeat the exclusion.

- After removal from Homey, manually reset the thermostat by pressing the right 2 buttons of the thermostat for 20 second, during the last few seconds `res` will be shown in the display.
- Set Homey in inclusion mode by _ **only** _ using the following method `Add device > Heatit > Z-TRM2fx`, the specific Z-TRM2fx inclusion instructions should be shown
  - _Don’t use the generic option_ `Add device > Homey > Z-wave`, _since it will not overrule the default secure inclusion!_

- Re-include the thermostat to Homey by following the inclusion instructions (mind the addition in step 5):

> 1. press the Center (confirm) button for 10 seconds. The display will show OFF.
> 2. Press Right(down) button 5 times till you see Con in the display.
> 3. Now start add a device to Homey.
> 4. Start inclusion mode by pressing Center(confirm) button for approximately 2 seconds. The inclusion / exclusion icon will appear in the display.
> 5. Confirmation will show `Inc` in the display.  
> If `Err`(error) is shown on the thermostat display, inclusion might still be successfull; check the functioning of the newly added device.

---

_[View the full topic](https://community.homey.app/t/heatit-z-wave-app-v2-7-1/166)._