# Hank Tech App (v1.1.3 | TEST v1.3.1) **URL:** \ **Category:** Apps\ **Tags:** app, z-wave\ **Created:** [August 22, 2018, 8:54pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162 "2018-08-22T20:54:57Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [August 22, 2018, 8:54pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/1 "2018-08-22T20:54:57Z")
# Hank Tech This app adds support for Z-wave devices made by [Hank Tech](http://www.hank-tech.com/). [![](https://us1.discourse-cdn.com/flex025/uploads/athom/original/1X/7a4d19dbc477fb2d406eda6d1b9e9c33476d95db.jpeg)](https://github.com/TedTolboom/com.hank-tech) ## Links: [Hank Tech app at Athom apps](https://apps.athom.com/app/com.hank-tech) [Hank Tech app Github repository](https://github.com/TedTolboom/com.hank-tech) ## Supported devices: ### Hank Scene controller 4 and 1 button version (HKZW-SCN04 & HKZW-SCN01) [![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-SCN04/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech)[![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-SCN01/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech) With the Hank Scene controller it is possible control any other devices (including non-Zwave) or set states / variables via Homey’s flows. The following triggers are supported: - Button Pressed 1x - Button held down - Button released - Any button pressed (including tokens) The following conditions are supported: - Battery alarm activated | Battery in healthy condition **Note:** All commands will be send to Homey. With this device it is possible to associate buttons to other devices to control them directly (without Homey). ### Hank Door / Window sensor (HKZW-DWS01) [![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-DWS01/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech) Door / Window sensor providing contact and tamper alarm. ### Hank MultiSensor (HKZW-MS01) [![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-MS01/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech) MultiSensor providing motion, illumination, temperature and humidity data for Homey. **Hank Motion Sensor (HKZW-MS02)** [![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-MS02/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech) Motion sensor providing motion alarm for Homey. ### Hank Smart plug (HKZW-SO0x\*\* ) [![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-SO0x/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech) Smart plug, including 2 USB ports, providing meter data as well as RGB led indication ### Hank Flood sensor (HKZW-FLD01) [![image](https://rawgit.com/TedTolboom/com.hank-tech/master/drivers/HKZW-FLD01/assets/icon.svg)](https://github.com/TedTolboom/com.hank-tech) Flood Sensor providing flooding-, tamper- and heat-alarm and temperature data for Homey. ## Supported Languages: - English - Dutch ## Supported Z-wave regions: - Europe - U.S./Canada/Mexico ## Acknowledgements: This app and driver development has been supported by: - Robbshop by providing a the devices for debugging: ## Feedback: Any requests please post them in the [Hank app topic on the [Athom Forum](https://forum.athom.com/discussion/3708/) or contact me on [Slack](https://athomcommunity.slack.com/team/tedtolboom) If possible, please report issues at the issues section [on Github](https://github.com/TedTolboom/com.hank-tech/issues)otherwise in the above mentioned topic. ## Contributions If you appreciate this app, contribute to future development by making a [paypal contribution](https://www.paypal.me/TedTolboom) ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [August 22, 2018, 8:55pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/2 "2018-08-22T20:55:42Z")
## Changelog: > v1.1.3 > > - Add missing productTypeID for the HKZW-MS02 [see request](https://community.homey.app/t/162/9) > v1.1.2 > > - Add support for the Hank HKZW-RGB01 bulb (thanks to @caseda) > - Add start-level and stop-level dim action cards for the Hank HKZW-RGB01 bulb > **update:** > - Update Homey meshdriver to 1.2.28 > v1.1.1 > > - Minor updates of Motion sensor parameters data ranges > - Add link to [Hank app topic](https://community.homey.app/t/162) on [community.athom.com](http://community.athom.com) > **update:** > - Update Homey meshdriver to 1.2.25 > v1.1.0 > > - Add support for the new Hank motion sensor (HKZW-MS02) > - Add support for the new Hank flood sensor (HKZW-FLD01) > - Update meshdriver to 1.2.10 > v1.0.3 > > - Fix issue with SCN01 flow card trigger > v1.0.2 > > - Add Homey community forum link > - Update meshdriver to 1.2.8 > - Driver clean-up & SDK2 optimizations ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [August 22, 2018, 8:56pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/3 "2018-08-22T20:56:20Z")
## Frequently Asked Questions: For Hank Tech app ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 25, 2018, 7:24am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/4 "2018-09-25T07:24:49Z")
I just release a minor update of the Hank Tech app (v1.1.1) to the app store. Changelog: > v1.1.1 > > - Minor updates of Motion sensor parameters data ranges > - Add link to [Hank app topic](https://community.homey.app/t/162) on [community.athom.com](http://community.athom.com) > **update:** > - Update Homey meshdriver to 1.2.25 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [November 14, 2018, 9:33pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/5 "2018-11-14T21:33:39Z")
I’ve just updated the Hank app with support for the RGB bulb, including the start-level and stop-level change flow cards. It is currently awaiting app store approval. > [@TedTolboom](#): > > v1.1.2 > > - Add support for the Hank HKZW-RGB01 bulb (thanks to @caseda) > - Add start-level and stop-level dim action cards for the Hank HKZW-RGB01 bulb > **update:** > - Update Homey meshdriver to 1.2.28 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [November 17, 2018, 9:17am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/6 "2018-11-17T09:17:33Z")
version 1.1.2 is available in the app store ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [December 3, 2018, 7:01am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/7 "2018-12-03T07:01:32Z")
Just added the motion sensor, but it just got added as general z-wave device with the message " no suitable Homey app could be found for this device. Device is added as basic z-wave device." Tried both secured and unsecured adding with same result. I don’t see what other option I have… ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 3, 2018, 7:34am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/8 "2018-12-03T07:34:12Z")
Hi @OA2.0, Can you show which ID’s (devices \> node information) are shown when this device is added as Generic device? ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [December 3, 2018, 8:44am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/9 "2018-12-03T08:44:20Z")
Node ID: 15 Product type ID: 768 Product ID: 18 Firmware: 4608 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 3, 2018, 10:10am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/10 "2018-12-03T10:10:08Z")
So I guess (?) it is the HKZW-MS02 motion sensor… but likely not the EU region. Product ID is equal to my (EU) sensor, firmware version also. Only Product type ID is different. ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [December 3, 2018, 7:22pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/11 "2018-12-03T19:22:29Z")
Yes, it’s the HKZW-MS02, but I don’t know if it’s for another region. There’s no indication for that on the box, manual or device. Just “made in China”, but that doesn’t have to mean anything. ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [December 8, 2018, 10:19am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/12 "2018-12-08T10:19:55Z")
Will my device type be added eventually? Or do I just have bad luck? 😑 ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [January 19, 2019, 1:04pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/13 "2019-01-19T13:04:18Z")
@TedTolboom, can you tell if my device will be added at some point? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [January 30, 2019, 9:10pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/14 "2019-01-30T21:10:27Z")
@OA2.0 appologies for the late answer, yes I’ve just uploaded the v1.1.3 version of the app to the app store _(waiting for approval)_ that is supporting your device. > [@TedTolboom](#): > > v1.1.3 > > - Add missing productTypeID for the HKZW-MS02 [see request](https://community.homey.app/t/162/9) Credits to @bvdbos for the pull request ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [February 3, 2019, 9:11pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/15 "2019-02-03T21:11:43Z")
@TedTolboom Thanks for the update! 🙂 I have been able to add the device, but after a first successful test, the motion alarm doesn’t turn off again. I’ve tried to change settings, but that doesn’t help. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [February 4, 2019, 10:20am UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/16 "2019-02-04T10:20:32Z")
Do you have any experience with installing an app through the command line interface? ---
**Author:** ![OA2.0](https://avatars.discourse-cdn.com/v4/letter/o/edb3f5/32.png) [@OA2.0](https://community.homey.app/u/OA2.0)\ **Post date:** [February 5, 2019, 7:55pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/17 "2019-02-05T19:55:55Z")
Yes, I know how to do that. That is, I have followed the steps here: [https://forum.athom.com/discussion/1448/how-to-cli-install-method](https://forum.athom.com/discussion/1448/how-to-cli-install-method), but then it fails upon installation. Which folder do I need to navigate to exactly before starting installation? ---
**Author:** ![HomeyBram](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homeybram/32/17513_2.png) [@HomeyBram](https://community.homey.app/u/HomeyBram)\ **Post date:** [May 14, 2020, 1:47pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/18 "2020-05-14T13:47:22Z")
Hello, the app can not be found in the Homey app store with keyword ‘Hank’ but is available: > **[Hank tech Z-wave](https://homey.app/nl-nl/app/com.hank-tech/Hank-tech-Z-wave/)** > > Ondersteuning voor Hank Z-wave apparaten and I was able to install in on my Homey. Does this app support the TechniSat HKZW-SCN04 ? > **[Scene switch 1](https://www.technisat.com/en_XX/Scene-switch-1/352-11335-22199/)** > > Scene switch 1 -\[0000/9521\] 4 buttons remote control \[0000/9521\], Scene switch 1, Actuators, Smart Home, Products, Customer (en\_XX) ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [May 17, 2020, 6:41pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/19 "2020-05-17T18:41:19Z")
> [@HomeyBram](#): > > Does this app support the TechniSat HKZW-SCN04 ? @HomeyBram Not sure; it looks like a rebranded Hank scene controller… likely it will use the same ID’s as the Hank device so then it will work. No guarantees though. ---
**Author:** ![Rob\_Bruining](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob_bruining/32/16757_2.png) [@Rob\_Bruining](https://community.homey.app/u/Rob_Bruining)\ **Post date:** [September 10, 2020, 9:41pm UTC](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162/20 "2020-09-10T21:41:58Z")
I have a strange issue. I have a 4 scene controller of Hank working fine and simple. But now I want to add a 1 scene controller of Hank. I can add the device and immediately it says battery full as message. But once push the button it says the battery is low and when i look at the device it goes from 0% to 1%. The button also beeps three times when pushed. Because it is my second button I took the battery from the other (93% full) but the problem persist. Does anyone know an option or has seen this before? I excluded and included again and that goes very well. Till I press the button. [Next page](https://community.homey.app/t/hank-tech-app-v1-1-3-test-v1-3-1/162.md?page=2)