# H.O.O.P. (Hope) - Homey Object Oriented Programming **URL:** \ **Category:** Apps\ **Tags:** app, tools, flow\ **Created:** [March 4, 2021, 6:22pm UTC](https://community.homey.app/t/h-o-o-p-hope-homey-object-oriented-programming/43709 "2021-03-04T18:22:00Z")\ **Posts on this page:** 1\ **Showing post:** 75
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [May 31, 2021, 7:12am UTC](https://community.homey.app/t/h-o-o-p-hope-homey-object-oriented-programming/43709/75 "2021-05-31T07:12:47Z")
Hey Dennis, The added trigger cards are not supose to be within the IF-THEN-ELSE part. Just place ALL triggercards before any other conditional cards. What you want is this: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/f/ffdcef62876ca9b76b74eda00f4d5b479303d5b9.png) This part will take card of all triggers; it will make sure the flow is triggered by all trigger cards. After this you can create your IF-THEN-ELSE part. But i think what you want is the below example: I just used a “direct” HOOP trigger (Sensor On) and added a second trigger (Sensor Off). Then a simplyfied If-Then statement. (If you want to trigger this flow to test it, you can use the HOOP Await card, like this: ) I’ll update the HOOP cards with some more information. N.b. There is no way to make an (added) trigger part of a condition. Because to run the trigger-condition, the flow would have to be triggered, before knowing if it should be triggered. So, adding a trigger is just like telling the flow simply: if …(Seonsor on) trigger flow and if …(Sensor off) trigger flow and if …(Button pushed) trigger flow. --- _[View the full topic](https://community.homey.app/t/h-o-o-p-hope-homey-object-oriented-programming/43709)._