# Greenwave Systems v.2.0 removed power capabilities **URL:** \ **Category:** Apps\ **Created:** [January 2, 2019, 4:34pm UTC](https://community.homey.app/t/greenwave-systems-v-2-0-removed-power-capabilities/6195 "2019-01-02T16:34:14Z")\ **Posts on this page:** 1\ **Showing post:** 128
**Author:** ![Rudi\_Hendrix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rudi_hendrix/32/31931_2.png) [@Rudi\_Hendrix](https://community.homey.app/u/Rudi_Hendrix)\ **Post date:** [July 17, 2024, 7:25am UTC](https://community.homey.app/t/greenwave-systems-v-2-0-removed-power-capabilities/6195/128 "2024-07-17T07:25:10Z")
Tried that, but it didn’t work. What DID work was removing the power node and adding it again. Quite a lot of work for something that used to work 🙂 > [@Rudi\_Hendrix](#): > > Now I have my power measurements back again. Can I exclude the “overall” power measurement from Homey? > Because currently it holds the power of PN1 as PN1 AND as total of the power node. So for example on one of them currently I have the following: > Overall 52,3 Watt > PN1 52,3 Watt > PN2 25,2 Watt > PN3 1,1 Watt > PN4 15,9 Watt > PN5 41,9 Watt > PN6 39 Watt > > And Homey shows a total of 227.7 Watt whereas this should be 175,4 Watt This is the only thing still open now. I’ve sent an E-mail to Athom requesting this feature (I think it is useful in other places than just this use case) and got the reply that they take it in consideration but cannot guarantee it will be done. Then I noticed there is at least one topic on this: [[Feature request] Excluding zones and devices from Homey Energy - Ideas & Suggestions - Homey Community Forum](https://community.homey.app/t/feature-request-excluding-zones-and-devices-from-homey-energy/74138) And people are getting the same response on this for months/years. --- _[View the full topic](https://community.homey.app/t/greenwave-systems-v-2-0-removed-power-capabilities/6195)._