# FP2 (via Aqara Matter bridge) stops updating presence after ~1-2 min since firmware 13.4.1 **URL:** \ **Category:** Questions & Help\ **Tags:** matter\ **Created:** [September 7, 2026, 4:33am UTC](https://community.homey.app/t/fp2-via-aqara-matter-bridge-stops-updating-presence-after-1-2-min-since-firmware-13-4-1/159262 "2026-09-07T04:33:02Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Martin\_Martinez](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@Martin\_Martinez](https://community.homey.app/u/Martin_Martinez)\ **Post date:** [September 7, 2026, 4:33am UTC](https://community.homey.app/t/fp2-via-aqara-matter-bridge-stops-updating-presence-after-1-2-min-since-firmware-13-4-1/159262/1 "2026-09-07T04:33:03Z")
Since updating Homey Pro (2023) to firmware **13.4.1** , my Aqara FP2 presence sensor has stopped working correctly. **Setup:** The FP2 is connected to Homey via the Aqara app’s “Signal” feature, which exposes it as a virtual Matter device through the Aqara hub. This setup worked flawlessly before the update — zone active/inactive states updated in real time. **Problem:** After the update, the Matter device only receives presence updates for 1-2 minutes, then stops. It doesn’t go offline/unavailable — it just gets stuck showing “no presence,” even though I’m still in the room. This is causing my lights to turn off on me constantly. **Why I believe this is a Homey-side issue:** Presence detection in the Aqara app itself is working perfectly the whole time. Only the data reaching Homey via Matter stops. **Troubleshooting already tried:** - Restarting Homey - Restarting the Aqara hub - Restarting/power-cycling the FP2 - Removing and re-adding the Matter device on Homey Has anyone else seen Matter devices (especially bridged Aqara devices) stop sending updates after 13.4.1? Any fixes or workarounds would be much appreciated — this has made several rooms in my house unusable for automation right now.