# Fire alarm flows
**URL:** https://community.homey.app/t/fire-alarm-flows/32061
**Category:** Flows
**Created:** [July 5, 2020, 12:51pm UTC](https://community.homey.app/t/fire-alarm-flows/32061 "2020-07-05T12:51:33Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Askerramp](https://community.homey.app/u/Askerramp)
#### Post date: [July 5, 2020, 12:51pm UTC](https://community.homey.app/t/fire-alarm-flows/32061/1 "2020-07-05T12:51:33Z")
Hi!
All new with flows and Homey, kindly ask for some advice.
I have 13 POPP z-wave smoke alarms in my system. How do I set up a flow that tells med where the alarm started? How do I set up I flow to turn all sirens off?
It seems easy with just one alarm in the system, but a lot of work with 13. Any tricks?
Thanks for any good help!
---
### Author:  [@Caseda](https://community.homey.app/u/Caseda)
#### Post date: [July 5, 2020, 3:20pm UTC](https://community.homey.app/t/fire-alarm-flows/32061/2 "2020-07-05T15:20:04Z")
Use from the “Devices” flow card (default flow cards of your homey) “an alarm has turned on” and select “smoke alarm”, this card has a tag with “zone” which you can use in your message where the alarm has triggered.
> [@Askerramp](#):
>
> How do I set up I flow to turn all sirens off
Usually you can’t turn off the alarm until you clear the alarm on the device itself, but as i don’t have this device it is kinda hard to tell.
If you mean how to turn on the other smoke alarms, then that most likely isn’t possible if it is a battery z-wave device, as it is asleep to preserve battery life.
---
### Author:  [@Askerramp](https://community.homey.app/u/Askerramp)
#### Post date: [July 8, 2020, 8:23pm UTC](https://community.homey.app/t/fire-alarm-flows/32061/3 "2020-07-08T20:23:52Z")
Thanks for good advise.