# Fibraro Dimmer 2 as Switch **URL:** \ **Category:** Devices\ **Created:** [July 10, 2019, 8:39pm UTC](https://community.homey.app/t/fibraro-dimmer-2-as-switch/15428 "2019-07-10T20:39:27Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![NBR](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nbr/32/13060_2.png) [@NBR](https://community.homey.app/u/NBR)\ **Post date:** [July 10, 2019, 8:39pm UTC](https://community.homey.app/t/fibraro-dimmer-2-as-switch/15428/1 "2019-07-10T20:39:27Z")
I am trying to use a Fibraro Dimmer 2 as a swich without physically connecting any light on the output. So, I use it just to detect the switch, and then use a flow to control some Hue lights. But I don’t get it to work properly. I am wondering if I made a mistake in connecting it. I couldn’t find any example on the internet. I have a brown wire connected to the L And a blue wire connected to the N And I have a pulse switch connected between Sx and S1. With this setup, I can include and exclude the sensor on my zwave network via homey. But if I press the switch, Homey doesn’t detect it in any way. What am I doing wrong? NBR ---
**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\ **Post date:** [July 11, 2019, 10:17pm UTC](https://community.homey.app/t/fibraro-dimmer-2-as-switch/15428/3 "2019-07-11T22:17:57Z")
I wouldn’t power it up without a load. It also says in its manual. ---
**Author:** ![NBR](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nbr/32/13060_2.png) [@NBR](https://community.homey.app/u/NBR)\ **Post date:** [July 12, 2019, 7:03am UTC](https://community.homey.app/t/fibraro-dimmer-2-as-switch/15428/4 "2019-07-12T07:03:14Z")
Yes, I can find it on google now if I include the word ‘load’ in my search. Didn’t think of that when searching before. Thanks for the help Roy.