# Fibaro Walli Switch doesn’t change state on app, when switching on/off manually **URL:** \ **Category:** Questions & Help\ **Created:** [March 30, 2020, 8:34pm UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748 "2020-03-30T20:34:08Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![DeVerSion](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/deversion/32/16389_2.png) [@DeVerSion](https://community.homey.app/u/DeVerSion)\ **Post date:** [March 30, 2020, 8:34pm UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/1 "2020-03-30T20:34:08Z")
Hi, Finally, I was able to add it to my Homey Pro. Seems to work normally when I turn on or off manually. But the Homey App doesn’t seem to recognize which state it is in. When I try to turn it on or off from the app it seems to work. Since I have my z-wave over mqtt, I also got it confirm. When I switch it on or off manually from the switch the state on “onoffoutput1 / offoutput2” doesn’t change state. Only when I try to change to on or off from the app or over mqtt it changes state. I’m currently running Homey version 4.1.0 and Fibaro v 2.4.2. Have tried to restart Homey Pro, and the Fibaro app. Also noticed that the Power Meter for output doesn’t change stuck on the old value. To be able to add the switch I need to have the Homey Pro 5cm away from the switch, so it’s a bit pain to add and remove multiple times. Any good advice will be appreciated. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [March 31, 2020, 10:31am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/2 "2020-03-31T10:31:00Z")
In the last update of the Fibaro app to version 2.4.2 the Walli Switch was added for the first time. It was not supported in the older Fibaro app versions. I have the problem that the Walli Switch cannot be included in single mode. It is only recognized as a “Simple Z-Wave device”. I suppose that the app is still buggy. Therefore please send the problems directly to Athom support. ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [March 31, 2020, 10:51am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/3 "2020-03-31T10:51:41Z")
Single mode wasn’t implemented yet, it is in the later update (v2.4.3), which is in the [test](https://homey.app/nl-nl/app/com.fibaro/Fibaro/test/) part of the app ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [March 31, 2020, 11:30am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/4 "2020-03-31T11:30:25Z")
Many thanks for the Information! 👍🏼 Edit: Inclusion was successful! ---
**Author:** ![DeVerSion](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/deversion/32/16389_2.png) [@DeVerSion](https://community.homey.app/u/DeVerSion)\ **Post date:** [April 5, 2020, 11:04am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/5 "2020-04-05T11:04:16Z")
Just a short update. Have sent mail to Homey Support. Problem is still still not solved. They need to do some more investigation. And will get back to me, when they got something new ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 5, 2020, 11:14am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/6 "2020-04-05T11:14:54Z")
Now that I could include the Walli Switch in single switch mode, I can reproduce the problem. Thanks for your efforts! ---
**Author:** ![paolobernardini](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paolobernardini/32/30202_2.png) [@paolobernardini](https://community.homey.app/u/paolobernardini)\ **Post date:** [January 8, 2021, 10:44am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/7 "2021-01-08T10:44:00Z")
@DeVerSion Same here. Is there any update? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 8, 2021, 11:05am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/8 "2021-01-08T11:05:01Z")
When I switch output 1, the change of the status is also displayed in the app. However, when I switch output 2, the status is not changed. Homey FW v5.0.0-rc.50 Fibaro App v3.0.4 (Experimental) ---
**Author:** ![paolobernardini](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paolobernardini/32/30202_2.png) [@paolobernardini](https://community.homey.app/u/paolobernardini)\ **Post date:** [January 8, 2021, 11:28am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/9 "2021-01-08T11:28:19Z")
Thank you. I have Walli Switch in single switch mode, Homey 4.2.0, Fibaro App 2.4.6. The Homey App doesn’t update the status when switching on/off manually, doesn’t matter if I click on button 1 or 2. Exactly as your main topic. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 8, 2021, 12:10pm UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/10 "2021-01-08T12:10:08Z")
With a Walli Switch in single switch mode it works flawless. So I guess they solved this issue with the app v3.x, but this version is only compatible with Homey FW v5.x. Probably Athom will not update the old app v2.4.6 anymore. I would contact Athom. I will also contact Athom about the problems with double switch mode . ---
**Author:** ![Bas\_Engelen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bas_engelen/32/36165_2.png) [@Bas\_Engelen](https://community.homey.app/u/Bas_Engelen)\ **Post date:** [February 18, 2021, 6:41pm UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/11 "2021-02-18T18:41:07Z")
Is there any update on this? Having the same issue, working fine from app but when changing state on the walli switch it is not being detected by homey, I do see watt changing to \> 0, but homey says its tunred off. Fibaro firmware 5.2 Fibaro app 2.4.6 Homey 4.2.0 ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [February 19, 2021, 10:47am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/12 "2021-02-19T10:47:01Z")
Homey FW: 5.0 Fibaro App: v3.0.6 (Test-Version) Fibaro Walli Switch FW: 5.2 Fibaro Walli Switch in “Single switch operating mode”: – Works perfectly Fibaro Walli Switch in “Double switch operating mode”: – Output 1 works perfectly: In the Homey app it is shown whether the light is on or off. The power consumption is also shown. – Output 2 is faulty: In the Homey app it is **not** shown whether the light is on or off (maybe it’s only one tile?). The power consumption is also **not** shown. There are also some other issues. The following action cards are missing, with the Fibaro Single/Double Switch 2 they are available: When… – The total consumption has changed – Switched on – Switched off And… – Is on/off Then… – Reset meter values So please contact Athom. Hopefully the bugs will be corrected quickly. However, I guess Athom will not revise the Fibaro app for Homey firmware v4.2, at least not prioritized. ---
**Author:** ![Bas\_Engelen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bas_engelen/32/36165_2.png) [@Bas\_Engelen](https://community.homey.app/u/Bas_Engelen)\ **Post date:** [February 19, 2021, 11:17am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/13 "2021-02-19T11:17:03Z")
Thanks for you reply fantross. I have updated Homey to 5.0 but where can I get/install the v3.0.6. Fib app? I am only using Output 1 so I could consider changing to single mode but I don’t fancy disassembling the switches. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [February 19, 2021, 11:31am UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/14 "2021-02-19T11:31:24Z")
> [@Bas\_Engelen](#): > > v3.0.6. Fib app > **[Fibaro](https://homey.app/de-de/app/com.fibaro/Fibaro/)** > > Dein Zuhause ist dein Schloss Just add `test` at the end of the URL. > [@Bas\_Engelen](#): > > I don’t fancy disassembling the switches. It may be possible to change the mode in the installed state. ![Bildschirmfoto 2021-02-19 um 12.24.57](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/e/9e6ed7e2d7e2c2fd22928cd67ff5fe8b7b66fb9f.png) In generally, it should be that the switches have to be re-included so that the problems can be eliminated. Please contact Athom anyway. ---
**Author:** ![Bas\_Engelen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bas_engelen/32/36165_2.png) [@Bas\_Engelen](https://community.homey.app/u/Bas_Engelen)\ **Post date:** [February 19, 2021, 5:01pm UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/15 "2021-02-19T17:01:31Z")
V3.0.6 fixed the problem, thanks. I will add a ticket so it will get the attention it needs. Thanks again ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [January 30, 2025, 8:31pm UTC](https://community.homey.app/t/fibaro-walli-switch-doesn-t-change-state-on-app-when-switching-on-off-manually/27748/16 "2025-01-30T20:31:19Z")
Archived on January 30, 2025, 8:31pm UTC