# Fibaro Wall Plug 2 turn on by itself **URL:** \ **Category:** Questions & Help\ **Created:** [January 2, 2020, 9:34pm UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662 "2020-01-02T21:34:15Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Phanatique](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phanatique/32/8191_2.png) [@Phanatique](https://community.homey.app/u/Phanatique)\ **Post date:** [January 2, 2020, 9:34pm UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/1 "2020-01-02T21:34:15Z")
I have some Fibaro Wall Plug 2 that sometimes turn on by theirselves after I have turned them off with a flow. The flow turns the plug off, the plug goes off for just a second and then turns on again by itself. According to Homey they are off but actually they are on. Does this have anything to do with Homey or is this a Fibaro issue? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 3, 2020, 5:55am UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/2 "2020-01-03T05:55:10Z")
I have 11 Fibaro WallPlugs (1st and 2nd Gen.) in use, some for more than 4 years. I have never had a problem like this and in various Fibaro forums I have never heard of the problem. ---
**Author:** ![Marcel\_Ubels](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcel_ubels/32/18860_2.png) [@Marcel\_Ubels](https://community.homey.app/u/Marcel_Ubels)\ **Post date:** [January 3, 2020, 9:41am UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/3 "2020-01-03T09:41:10Z")
> [@Phanatique](#): > > the plug goes off for just a second and then turns on again by itself Are you sure they go off, and after a second go on? Maybe there is another flow? Is your mesh ok? If your mesh ik ok, i would delete the plug(to be sure there is no flow using to turn it on) ad the plug again. Suc6 ---
**Author:** ![Phanatique](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phanatique/32/8191_2.png) [@Phanatique](https://community.homey.app/u/Phanatique)\ **Post date:** [January 4, 2020, 3:47pm UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/4 "2020-01-04T15:47:00Z")
Thank you for your advice. I have five wall plugs in one room and sometimes one of them (not always the same) turns off and after about a second turns on again. I’m pretty sure he turns on by itself and not by another flow, I checked that. I’m not sure how to check my mesh is OK. In Homey Developer I find a ‘last working route’ for the plug. Next time I try your suggestion to delete the plug and add it again. ---
**Author:** ![Marcel\_Ubels](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcel_ubels/32/18860_2.png) [@Marcel\_Ubels](https://community.homey.app/u/Marcel_Ubels)\ **Post date:** [January 4, 2020, 4:13pm UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/5 "2020-01-04T16:13:06Z")
Yep the developers page shows your routing(not the mesh) it gives a pretty good idea if your plug can communicate with Homey. Scrolling to the right, gives three dots. When you click those dots, you get some possibilities to try and a repair possibility . Also a Pull the plug from Homey for at least 15 minutes will rebuild your mesh. Sometimes that helps to. ---
**Author:** ![Joakim\_Johansson1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joakim_johansson1/32/16384_2.png) [@Joakim\_Johansson1](https://community.homey.app/u/Joakim_Johansson1)\ **Post date:** [January 4, 2020, 8:54pm UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/6 "2020-01-04T20:54:07Z")
I have the same problem with on one of my 14 Fibero Wall plug 2 and I suspect it could have somthing to do thath I have a (big) transformer attached to the plug and it create some kind of interference. What do you have connected to your plug? ---
**Author:** ![Phanatique](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phanatique/32/8191_2.png) [@Phanatique](https://community.homey.app/u/Phanatique)\ **Post date:** [January 5, 2020, 4:28pm UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/7 "2020-01-05T16:28:43Z")
At this moment I have 5 Fibaro Wall Plug 2 and all have 12V halogen lamps connected. Until now: - 2 have no problems (connected with the same type of lamp, 50W halogen with dimmer), - 1 had just two or three times this problem (20W halogen lamp, no dimmer), - 2 had several times this problem (both plugs connect two 12V LED lamps with a cord dimmer). ---
**Author:** ![Mike\_Krijnen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mike_krijnen/32/34271_2.png) [@Mike\_Krijnen](https://community.homey.app/u/Mike_Krijnen)\ **Post date:** [January 18, 2021, 5:56am UTC](https://community.homey.app/t/fibaro-wall-plug-2-turn-on-by-itself/23662/8 "2021-01-18T05:56:22Z")
Same issue here One wall plugs puts itself back on after a flow turned it off. 3 wall plugs. All have issues. Disconnected and reconnected several times but the issue is not resolved.