# Fibaro update Homey **URL:** \ **Category:** Questions & Help\ **Tags:** z-wave\ **Created:** [January 20, 2022, 10:40am UTC](https://community.homey.app/t/fibaro-update-homey/58744 "2022-01-20T10:40:51Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Johan\_Veldhuis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_veldhuis/32/47913_2.png) [@Johan\_Veldhuis](https://community.homey.app/u/Johan_Veldhuis)\ **Post date:** [January 20, 2022, 10:40am UTC](https://community.homey.app/t/fibaro-update-homey/58744/1 "2022-01-20T10:40:51Z")
Since the fibaro app has been updated januari 11th 2022 some of my Fibaro shutters 3 were not working properly. 2 shutter even can’t be opened anymore using the impulse switches (they cannot be resetted either!!!) ---
**Author:** ![DidierVU](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/didiervu/32/12458_2.png) [@DidierVU](https://community.homey.app/u/DidierVU)\ **Post date:** [January 20, 2022, 10:48am UTC](https://community.homey.app/t/fibaro-update-homey/58744/2 "2022-01-20T10:48:51Z")
There’s a new update since today, try that one. ---
**Author:** ![Johan\_Veldhuis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_veldhuis/32/47913_2.png) [@Johan\_Veldhuis](https://community.homey.app/u/Johan_Veldhuis)\ **Post date:** [January 20, 2022, 12:22pm UTC](https://community.homey.app/t/fibaro-update-homey/58744/3 "2022-01-20T12:22:27Z")
Didier, I saw indeed that there was an update this morning. For 1 shutter I had to change the input wires back again to the state they were in 2 weeks ago. 2 shutters which did not react to the impuls switches anymore (and also not via Homey) are still “dead”. Both shutters show blinking bleu led’s (+/- 3 seconds interval), where they can not be reset by the standard procedure (keep button b pressed for around 10 seconds). I also disconnect the 3 cables to the motors, again without result. Trying to connect them Homey is also not working (pressing 3\* button b). Johan ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 20, 2022, 2:07pm UTC](https://community.homey.app/t/fibaro-update-homey/58744/4 "2022-01-20T14:07:21Z")
> [@Johan\_Veldhuis](#): > > bleu I guess you mean blue, right? “Blue” isn’t mentioned in the manual at all, so what should it mean? Btw, there are already some posts with similar problems after updating the Fibaro app to v3.1.5 and suggestions to solve these problems. So please have a look at this thread and use the search function first in the future… > [@Devices suddenly stop working](https://community.homey.app/t/devices-suddenly-stop-working/58714): > > Hi I found out that some devices are no longer responding. So far everything has been working fine and there have been no changes in the system. 3 out of 6 Fibaro Rollershutter have an problem. Strange is I can start the calibration via the app. But positioning the Roller shutter or open the Venetian blinds is no longer working. Same issue with some Hue devices, same situation here and error message like this. Missing capabilities Listener: windowcoverings\_set Any idea? If the modules were correctly wired before, then I can’t imagine it’s a wiring issue now. Of course, an app update can affect the function, but it has nothing to do with the wiring.