# Fibaro The Heat Controller (Valve)

**URL:** <https://community.homey.app/t/fibaro-the-heat-controller-valve/128471>\
**Category:** Devices\
**Created:** [January 21, 2025, 2:34pm UTC](https://community.homey.app/t/fibaro-the-heat-controller-valve/128471 "2025-01-21T14:34:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vavrekm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/vavrekm/32/126939_2.png) [@vavrekm](https://community.homey.app/u/vavrekm)\
**Post date:** [January 21, 2025, 2:34pm UTC](https://community.homey.app/t/fibaro-the-heat-controller-valve/128471/1 "2025-01-21T14:34:32Z")

</div>

I installed to all my radiators Fibaro Valves - I noticed, that if I manually fully open valve (magenta color) or fully close (White) - then I am not able to control it via HOMEY app

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/c/acd4076ab8bb49b95d066e1cc25c94e0302b02d4.png)

As shown on the image - Device should define three states, but HOMEY app does not handle those states, only heat temperature - which is ignored when fully closed or ofully opened.

To me it seems as application BUG - Does anyone use his valves ?

---

<div class="post-metadata">

**Author:** ![Ruud\_Schellekens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ruud_schellekens/32/79224_2.png) [@Ruud\_Schellekens](https://community.homey.app/u/Ruud_Schellekens)\
**Post date:** [January 25, 2025, 4:22pm UTC](https://community.homey.app/t/fibaro-the-heat-controller-valve/128471/2 "2025-01-25T16:22:17Z")

</div>

I noticed the same.  
I think there is a setting to prevent it to be set manually.

 ![1000017103](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0de077fa049ac7f47c99196c34dfac5d1f0fdb6c.jpeg)

I have a problem with an immence amount of messages that impairs my zwave network and tx errors are at approx 30%.  
Ik have 8 valves installed.