# Fibaro Smart Implant

**URL:** <https://community.homey.app/t/fibaro-smart-implant/28892>\
**Category:** Devices\
**Created:** [April 24, 2020, 7:39am UTC](https://community.homey.app/t/fibaro-smart-implant/28892 "2020-04-24T07:39:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [April 24, 2020, 8:19am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/2 "2020-04-24T08:19:27Z")

</div>

In the “Advanced settings” of the Smart Implant → Raw configuration parameters:  
Parameter ID,Size,Value (without spaces!)  
Parameter ID: 20  
Size: 1  
value: 2

This means:  
20,1,2  
156,2,1  
21,1,2  
157,2,1

or

20,1,2;156,2,1;21,1,2;157,2,1

> [@Z-Wave Raw Data Format Dev Postal](https://community.homey.app/t/z-wave-raw-data-format-dev-postal/15543/5):
>
> You need much more “parameters” when sending an configuration parameter, raw data is for all possible z-wave commands, not just parameters (like the expert parameters) which is only 1 of the many possible command classes. Dest Node ID, Command Class, Command Class Function, Value(s). so you should also add the Command Class for CONFIGURATION Command class (112) and the SET Function (4) in your line: 30,112,4,14,1,1 30: Destination Node ID 112: CONFIGURATION Command Class 4: CONFIGURATION S…

---

_[View the full topic](https://community.homey.app/t/fibaro-smart-implant/28892)._