# Fibaro Smart Implant **URL:** \ **Category:** Devices\ **Created:** [April 24, 2020, 7:39am UTC](https://community.homey.app/t/fibaro-smart-implant/28892 "2020-04-24T07:39:01Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [April 24, 2020, 7:39am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/1 "2020-04-24T07:39:02Z")
Can anyone advise me how to set up the parameters on Homey for a fibaro smart implant as per section 4.9 of the fibre instal manual. ![Smart Implant](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/a/da108c51ddbb82a40b02c897e8f0d560384743b8.jpeg) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 24, 2020, 8:19am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/2 "2020-04-24T08:19:27Z")
In the “Advanced settings” of the Smart Implant → Raw configuration parameters: Parameter ID,Size,Value (without spaces!) Parameter ID: 20 Size: 1 value: 2 This means: 20,1,2 156,2,1 21,1,2 157,2,1 or 20,1,2;156,2,1;21,1,2;157,2,1 > [@Z-Wave Raw Data Format Dev Postal](https://community.homey.app/t/z-wave-raw-data-format-dev-postal/15543/5): > > You need much more “parameters” when sending an configuration parameter, raw data is for all possible z-wave commands, not just parameters (like the expert parameters) which is only 1 of the many possible command classes. Dest Node ID, Command Class, Command Class Function, Value(s). so you should also add the Command Class for CONFIGURATION Command class (112) and the SET Function (4) in your line: 30,112,4,14,1,1 30: Destination Node ID 112: CONFIGURATION Command Class 4: CONFIGURATION S… ---
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [April 24, 2020, 10:17am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/3 "2020-04-24T10:17:47Z")
Thanks very much @antross that worked well. So now I have the question of how to activate output 1 and output 2. Is the only way to press the icon, select output 1 or output 2 and then press the switch? Would the only other way be to have a physical button with two switches? But I really just want to use my phone so was hoping I could just go into the Homey App and press the icon. ---
**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\ **Post date:** [April 24, 2020, 10:50am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/4 "2020-04-24T10:50:06Z")
> [@Peter\_Bittner](#): > > But I really just want to use my phone so was hoping I could just go into the Homey App and press the icon. Just create 2 virtual devices, name them as you like, and two flows for each of the outputs. ---
**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\ **Post date:** [May 13, 2020, 7:15pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/5 "2020-05-13T19:15:35Z")
For everyone who is interested in how you can separate the Inputs from Outputs.😀 > [@Seperate the input from output - Fibaro Smart Implant](https://community.homey.app/t/seperate-the-input-from-output-fibaro-smart-implant/28950/7): > > You can separate the Inputs from Outputs by sending Z-Wave Raw Parameters Using the Protection Command Class (0x75) Node-ID,0x75,0x1,0x2,0x0 ---
**Author:** ![Andreas\_Berglind](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreas_berglind/32/18007_2.png) [@Andreas\_Berglind](https://community.homey.app/u/Andreas_Berglind)\ **Post date:** [November 10, 2020, 9:04am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/6 "2020-11-10T09:04:16Z")
Great info, Osorkon. Just what I needed to know! ---
**Author:** ![Homey\_User\_T](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_user_t/32/65605_2.png) [@Homey\_User\_T](https://community.homey.app/u/Homey_User_T)\ **Post date:** [January 6, 2021, 8:00pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/7 "2021-01-06T20:00:06Z")
I am still trying to invert the outputs to Normally Closed via 154,1,1;155,1,1 but that won’t work.Any ideas? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 7, 2021, 6:14am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/8 "2021-01-07T06:14:02Z")
Why don’t use the „Output configuration“? Change „Output orientation“ into „inverted“ and that’s it. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/6/9694ce31447eee8a578d3c1c394e6c15e9a6b47f.jpeg) ---
**Author:** ![Homey\_User\_T](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_user_t/32/65605_2.png) [@Homey\_User\_T](https://community.homey.app/u/Homey_User_T)\ **Post date:** [January 7, 2021, 6:08pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/9 "2021-01-07T18:08:29Z")
That just swaps 1 with 2 and vice versa. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 7, 2021, 6:16pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/10 "2021-01-07T18:16:21Z")
You’re right, sorry, didn’t tried it. Then switch „Output 1 Mode“ and „Output 2 Mode“ into: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/d/3dc6ea1ade726af94a43a5ba3acbc98dcd41342f.jpeg) ---
**Author:** ![Homey\_User\_T](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_user_t/32/65605_2.png) [@Homey\_User\_T](https://community.homey.app/u/Homey_User_T)\ **Post date:** [January 7, 2021, 6:30pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/11 "2021-01-07T18:30:52Z")
Yes, that’s what I tried and what didn’t work, thus my posting. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 7, 2021, 6:48pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/12 "2021-01-07T18:48:56Z")
You wrote that the raw configuration did not work. You did not wrote that you already tried to change the outputs via the advanced device properties. I am not a psychic, sorry. Less information, useless answers… Do you also confirm the changes by clicking the checkmark in the upper right corner? Is the change confirmed afterwards? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/5/a5c7a7b884dcfd444be15c0933dea0d19d869270.jpeg) ---
**Author:** ![Homey\_User\_T](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_user_t/32/65605_2.png) [@Homey\_User\_T](https://community.homey.app/u/Homey_User_T)\ **Post date:** [January 8, 2021, 3:09pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/13 "2021-01-08T15:09:13Z")
1. I am trying to change the OUTPUTS from normally open to normally closed 2. Using the option in the configuration window “Output 1/2 Mode” didn’t work. Outputs still NO. 3. Sending the raw command (154,1,1;155,1,1) didn’t work. Outputs still NO. ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [January 8, 2021, 4:35pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/14 "2021-01-08T16:35:15Z")
When u go to [developer.athom.com](http://developer.athom.com) and hit Tools/devices, search for the implant. There is key 154 and 155. It says “0” for normally open and “1” for normally closed. I can change the setting in advanced settings in the mobile app and then it changes real life in the developer page. Where do u see “NO” ? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 8, 2021, 5:01pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/15 "2021-01-08T17:01:58Z")
Have you confirmed the changes? Is the smart implant reachable in the Z-Wave mesh? ---
**Author:** ![Homey\_User\_T](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_user_t/32/65605_2.png) [@Homey\_User\_T](https://community.homey.app/u/Homey_User_T)\ **Post date:** [January 9, 2021, 3:03pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/16 "2021-01-09T15:03:14Z")
I tried that, unfortunately it doesn’t change when I send the raw commands. Anyway guys, thanks for trying to help. ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [January 9, 2021, 3:07pm UTC](https://community.homey.app/t/fibaro-smart-implant/28892/17 "2021-01-09T15:07:22Z")
If it doesn’t change when changing the settings in the device then there is something wrong with the mesh network. Did u try to change the setting in advanced settings? So, not with raw commands plz. If they not change plz put the implant next to Homey (or the other way around) and try again. In device/advanced settings change the normally open to normally closed, go 1 page back and hit the check sign at the top right of that page. The mobile app also gives a confirmation when settings was stored. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/e/9e7209ea58356e15c60c3f7d9a30e9689ebeeca6.jpeg) ---
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [January 12, 2021, 6:17am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/18 "2021-01-12T06:17:49Z")
I have a smart implant installed to open my garage door. I use input 1 to monitor when the tilt door is opened or closed. I want to use input 2 to detect if the side door is opened or closed using a similar reed switch I used for the tilt door, even though I don’t use output 2 for anything. At the moment both input 1 and input 2 get set as soon as I open the tilt door. Any advice appreciated? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [January 12, 2021, 10:27am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/19 "2021-01-12T10:27:44Z")
@Rocodamelshekima, I have already asked all these questions and have not received clear answers. @Peter_Bittner, can’t reproduce it. I have just tested it myself. Only input 1 reports alarm when I close reed contact 1 (NO). Only input 2 reports alarm when I close reed contact 2 (NO). It also works the vice versa, meaning with NC. Are the reed contacts connected correctly? - Reed contact 1 with GND (blue, next to red!) and IN1 (yellow) - Reed contact 2 with GND (blue, next to red!) and IN2 (green) **Edit** ![FSI](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/e/3e84fab9e116da914e4290b7907a283addf56b80.gif) @Peter_Bittner, I hope it can be seen on the video. Don’t get confused, the video will start over and over again. Explanation: - If I close input 1, then output 1 is closed (and remains closed until the video is started again from the beginning). - If I close input 2, then output 2 is closed (and remains closed until the video is started from the beginning again). ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [January 12, 2021, 10:30am UTC](https://community.homey.app/t/fibaro-smart-implant/28892/20 "2021-01-12T10:30:44Z")
> [@DirkG](#): > > @Rocodamelshekima, I have already asked all these questions and have not received clear answers Sorry m8, I won’t interrupt u again. [Next page](https://community.homey.app/t/fibaro-smart-implant/28892.md?page=2)