# Fibaro Smart Implant Signal or no Signal

**URL:** <https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869>\
**Category:** Questions & Help\
**Tags:** z-wave, flow\
**Created:** [December 2, 2021, 7:03am UTC](https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869 "2021-12-02T07:03:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![JanWynen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/janwynen/32/33967_2.png) [@JanWynen](https://community.homey.app/u/JanWynen)\
**Post date:** [December 2, 2021, 7:03am UTC](https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869/1 "2021-12-02T07:03:13Z")

</div>

Hey,

I have a Fibaro smart implant.

A Panasonic heat pump is connected to this, when it gets too cold outside and it is no longer profitable, it gives a signal.

I receive that signal with the Smart Implant. From that moment I start the oil boiler.

But if the signal drops, I should also be able to give a stop message to a flow. But I can’t give that signal.

Because I can only choose Input 1 switched. So there is no option for input 1 not switched.

Is there anyone who might know a solution to this?

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [December 2, 2021, 7:08am UTC](https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869/2 "2021-12-02T07:08:57Z")

</div>

![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/3/a31c57402d5757cd9b55608ed5bba8550b7252d2.png)

I think you need to use the first two? The “switched” sounds like it means “toggled” (either opened or closed).

---

<div class="post-metadata">

**Author:** ![JanWynen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/janwynen/32/33967_2.png) [@JanWynen](https://community.homey.app/u/JanWynen)\
**Post date:** [December 2, 2021, 8:09am UTC](https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869/3 "2021-12-02T08:09:25Z")

</div>

Hi,

I tought that also, So I tried that, but nothing happend.

Maybe I did something wrong ? Are you sure about that ?

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [December 2, 2021, 11:56am UTC](https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869/4 "2021-12-02T11:56:10Z")

</div>

No, I’m not sure (although I just noticed that my post was showing Input 2 instead of Input 1, but I assume that you picked the correct one).

If the “Input 1 switched” flow trigger works for you, you can probably use an AND card to determine what the new state is, and use that to switch your boiler on/off.

---

<div class="post-metadata">

**Author:** ![JanWynen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/janwynen/32/33967_2.png) [@JanWynen](https://community.homey.app/u/JanWynen)\
**Post date:** [December 7, 2021, 4:38pm UTC](https://community.homey.app/t/fibaro-smart-implant-signal-or-no-signal/55869/5 "2021-12-07T16:38:11Z")

</div>

Hi,

You were correct. Problem was that it takes very long for the pump when to make a change.  
It’s all working now.

Thanks!