# Fibaro smart implant input alarm reset **URL:** \ **Category:** Questions & Help\ **Tags:** app, z-wave\ **Created:** [April 16, 2020, 3:08pm UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496 "2020-04-16T15:08:32Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Rim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rim/32/16844_2.png) [@Rim](https://community.homey.app/u/Rim)\ **Post date:** [April 16, 2020, 3:08pm UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/1 "2020-04-16T15:08:32Z")
Hi there, I use a Fibaro Smart implant for setting and unsetting my burglar alarm witch works fine. But in the Homey app, the input 2 alarm warning keeps lit, although the warning is 3 month old and I don’t know what triggered it. Does anyone know how to reset this? ![Smart Implant](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/6/067805092faf0fa078c0925a57d9fef2414f8b2a.jpeg) ---
**Author:** ![Andrea\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andrea_m/32/18744_2.png) [@Andrea\_M](https://community.homey.app/u/Andrea_M)\ **Post date:** [April 16, 2020, 3:39pm UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/2 "2020-04-16T15:39:21Z")
I’e the same problem, I could resolve it only detaching the device from his connector and connect it again. ---
**Author:** ![Rim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rim/32/16844_2.png) [@Rim](https://community.homey.app/u/Rim)\ **Post date:** [April 16, 2020, 6:58pm UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/3 "2020-04-16T18:58:50Z")
Hi Andrea, thanks for your reply. I tried detaching the connector. Unfortunately this didn’t help for me. I also disconnected the power supply for a few hours, this didn’t help either. I think it is a memory value in the app itself that is being kept. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 16, 2020, 7:07pm UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/4 "2020-04-16T19:07:55Z")
I had this problem once with a Fibaro Motion Sensor. I had to exclude and include the sensor to delete the alarm status. Unfortunately, this can cause a lot of work. ☹ ---
**Author:** ![Peter\_Bittner](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_bittner/32/16698_2.png) [@Peter\_Bittner](https://community.homey.app/u/Peter_Bittner)\ **Post date:** [May 5, 2020, 8:54pm UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/5 "2020-05-05T20:54:31Z")
Rim, have you resolved your issue yet? This alarm input on the Smart Implant seems to have some degree of magic associated with it. I have two smart implants set up. One works perfectly (after a lot of messing around - I still don’t really know how I got the first one to set the input but it does) but a second one which is set up identically will not set or reset the input. If any one has any advice that would be appreciated. ---
**Author:** ![Rim](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rim/32/16844_2.png) [@Rim](https://community.homey.app/u/Rim)\ **Post date:** [May 6, 2020, 7:22am UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/6 "2020-05-06T07:22:08Z")
Hi Peter, no unfortunately I have not been able to fix it yet. I will probably have to delete the smart implant and start all over to get rid of the alarm. But that is quite a lot of work. So I am still hoping for an answer from someone with the real solution. ---
**Author:** ![Andrea\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andrea_m/32/18744_2.png) [@Andrea\_M](https://community.homey.app/u/Andrea_M)\ **Post date:** [May 6, 2020, 9:24am UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/7 "2020-05-06T09:24:22Z")
Same problem.you can simply remove supply to the Fibaro implant. I unplug them and plug again ---
**Author:** ![Andrea\_M](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andrea_m/32/18744_2.png) [@Andrea\_M](https://community.homey.app/u/Andrea_M)\ **Post date:** [May 6, 2020, 11:13am UTC](https://community.homey.app/t/fibaro-smart-implant-input-alarm-reset/28496/8 "2020-05-06T11:13:14Z")
But mind the problem is not in the devices, they are working fine with my Zipato and my Vera installations…just with Homey they are not supported correctly