# Fibaro Singel Switch 2, and setting auto off **URL:** \ **Category:** Questions & Help\ **Tags:** app\ **Created:** [February 13, 2020, 12:12pm UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861 "2020-02-13T12:12:47Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Stein\_Gulbrandsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stein_gulbrandsen/32/17535_2.png) [@Stein\_Gulbrandsen](https://community.homey.app/u/Stein_Gulbrandsen)\ **Post date:** [February 13, 2020, 12:12pm UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/1 "2020-02-13T12:12:47Z")
Hi. Is there anyone who has get Fibaro Single Switch 2 to turn off automatically without using Flow? Those components have, among other things, parameter 10, 11 and 12 where Auto Off may be set. I’ve tried sending raw data from Homey to parameter 10 (10,1,4) and to parameter 12 (12,2,1800), but it doesn’t seem to work? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [February 13, 2020, 12:22pm UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/2 "2020-02-13T12:22:02Z")
Have a look at this post: > [@Z-Wave Raw Data Format Dev Postal](https://community.homey.app/t/z-wave-raw-data-format-dev-postal/15543/5): > > You need much more “parameters” when sending an configuration parameter, raw data is for all possible z-wave commands, not just parameters (like the expert parameters) which is only 1 of the many possible command classes. Dest Node ID, Command Class, Command Class Function, Value(s). so you should also add the Command Class for CONFIGURATION Command class (112) and the SET Function (4) in your line: 30,112,4,14,1,1 30: Destination Node ID 112: CONFIGURATION Command Class 4: CONFIGURATION S… ---
**Author:** ![Stein\_Gulbrandsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stein_gulbrandsen/32/17535_2.png) [@Stein\_Gulbrandsen](https://community.homey.app/u/Stein_Gulbrandsen)\ **Post date:** [February 13, 2020, 12:35pm UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/3 "2020-02-13T12:35:59Z")
Thank You 🙂 Then I have to look at this. But I have a couple of questions. 1. Will always “Command Class” be 112, and “Command Class function” be 4? 2. Do I have to release my Fiabro from Secure device to Unsecure, and how do I do that? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [February 13, 2020, 1:34pm UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/4 "2020-02-13T13:34:33Z")
> [@Stein\_Gulbrandsen](#): > > Will always “Command Class” be 112, and “Command Class function” be 4? I’m out of that, sorry. > [@Stein\_Gulbrandsen](#): > > Do I have to release my Fiabro from Secure device to Unsecure, and how do I do that? If I understand it correctly, yes. But how, I don’t know either. But isn’t it possible to change the parameters via “advanced settings” (gear wheel)? ---
**Author:** ![Stein\_Gulbrandsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stein_gulbrandsen/32/17535_2.png) [@Stein\_Gulbrandsen](https://community.homey.app/u/Stein_Gulbrandsen)\ **Post date:** [February 14, 2020, 5:51am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/5 "2020-02-14T05:51:40Z")
It didn’t look like that. But thank you anyway 🙂 Is there anyone else who can tell me how to turn off Secure Mode for my Fibaro pills, using Homey? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [February 14, 2020, 6:56am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/6 "2020-02-14T06:56:44Z")
Maybe ask the Fibaro support: > **[FIBARO | Support for your smart home system](https://www.fibaro.com/en/support/)** > > Contact with FIBARO support department. Meet smart home experts and find out more about smart home devices manufactured in Poland. Or someone in the Fibaro Forum: [https://forum.fibaro.com/](https://forum.fibaro.com/) ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [February 14, 2020, 7:09am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/7 "2020-02-14T07:09:16Z")
To include any zwave device unsecure, if the device doesn’t offer it itself (like fibaro doesn’t), you’ll have to edit the fibaro app’s code, just search the forum, there is a dedicated topic for this. ---
**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\ **Post date:** [February 14, 2020, 7:47am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/8 "2020-02-14T07:47:44Z")
A stupid question on the side. What does the type of inclusion (secure or Unsecure) have to do with setting the Parameter. ---
**Author:** ![Stein\_Gulbrandsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stein_gulbrandsen/32/17535_2.png) [@Stein\_Gulbrandsen](https://community.homey.app/u/Stein_Gulbrandsen)\ **Post date:** [February 14, 2020, 10:02am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/9 "2020-02-14T10:02:36Z")
Because some essential features, of for example Fibaro, are not available for configuration in Homey. That’s why I ask about this on a forum for Homey. I think Flow is unnecessary if the properties already is there, in the component. ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [February 14, 2020, 10:02am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/10 "2020-02-14T10:02:52Z")
If he wants to do it in a flow (as that is being insinuating currently) then a device that is included secure can not be altered with the “send raw command” flow card. ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [February 14, 2020, 10:04am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/11 "2020-02-14T10:04:11Z")
If you just want to change a parameter that isn’t in the settings, please use the “raw configuration parameters” in the device’s advanced settings, that is possible always, and only needs the parameter number, the size and its value (IE: `5,2,2`) ---
**Author:** ![Stein\_Gulbrandsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stein_gulbrandsen/32/17535_2.png) [@Stein\_Gulbrandsen](https://community.homey.app/u/Stein_Gulbrandsen)\ **Post date:** [February 14, 2020, 10:08am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/12 "2020-02-14T10:08:52Z")
Okey, then I will try again :). Thank You. ---
**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\ **Post date:** [February 16, 2020, 10:10am UTC](https://community.homey.app/t/fibaro-singel-switch-2-and-setting-auto-off/25861/13 "2020-02-16T10:10:47Z")
> [@Stein\_Gulbrandsen](#): > > I’ve tried sending raw data from Homey to parameter 10 (10,1,4) I tried it yesterday with FGS223. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/1/f14c8ec83ba2fc70b79eb34429b50e3a19223e66.jpeg) It work’s.